Cumbria · England
Bath chip & crack repair in Coulderton, Cumbria
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Coulderton and across Cumbria. Send photos for a free, fixed quote.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
Do you need bath repair in Coulderton?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a photo:
- Cracks in an acrylic bath
- A failed DIY repair that’s discoloured or lifting
- A chip where the taps sit
- Chips caused by builders
What your quote should include
- How changes to the job are handled
- Aftercare advice
- If travel is included in the price
- Whether a trained technician does the job
Bath repair in Coulderton, done in place
Most of our bath repairs take a few hours, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Whether it’s a kit repair that didn’t last and a chip where the taps sit, we can usually put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Coulderton (CA22)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- We leave the room as we found it
- Everything repaired in place
- One price list for the entire UK
- Fixed prices from your pictures
Read our prices page or guide to resurfacing and replacement costs.
Places near Coulderton
Also in Coulderton
What bath repair costs
Repairs from £95. We price every job individually. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How much damage there is
- What the surface is made of
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Work for landlords and builders
If you manage property in Coulderton, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Coulderton and nearby
Coulderton is about 5 miles south of Whitehaven, in Cumbria. We travel to homes and businesses in Coulderton, so you do not need to take anything anywhere. Our repair technicians cover all 438 towns and villages across Cumbria. You can also see our page for Liverpool, about 78 miles away.
Our repair technicians cover all of the CA22 postcode area and the streets around it. Whether you live on Well Lane and Sea Lane or a nearby road, a technician can come to you. Close by, we cover Nethertown (1 mile south-east), Orgill (2 miles north-east), Thornhill (2 miles east), Egremont (2 miles north-east) and St Bees (2 miles north-west). Within a short drive, we also cover Workington (12 miles north), Whitehaven (5 miles north), Moorclose (11 miles north), Cleator Moor (4 miles north-east), Bransty (6 miles north) and Seaton (14 miles north).
Around Coulderton
Typical jobs here are in homes near West Lakes Academy. The nearest railway station is Nethertown station, roughly 0.6 miles south. A little further out are West Cumberland Hospital (4.5 miles north) and Braystones Brough Hill (2.5 miles south-east). Open spaces near Coulderton include Ponsonby Tarn and St Bees Head RSPB reserve.
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Your questions about bath repair in Coulderton
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Do you work in Coulderton?
Yes. We work across the UK and come to Coulderton and the rest of Cumbria. Send pictures and we’ll quote, or call 0345 017 0787.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes two to three hours for most chips. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the following day, the bath is ready to use.
How to prepare
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Open a window if you can
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
