Wolverhampton · England
Bath chip & crack repair in Coven, Wolverhampton
We travel to Coven for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
Bath repair in Coven, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include rusty patches near the plughole and scratches you can feel with a fingernail, across acrylic, cast iron enamel and whirlpool & spa baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Where
- Coven (WV9)
- Area hub
- Wolverhampton
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes two to three hours for most chips. If anything looks different from your pictures, we will talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Related advice
Nearby places to Coven
Other services in Coven
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Colour-matched on site
- Technicians who travel to you, UK-wide
Take a look at our prices page or resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed price
Two or three clear photos are typically enough. It helps if you send:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- One picture of the entire bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
FAQs for Coven
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
How much does bath repair cost in Coven?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Coven as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Covering Coven
Coven is about 5 miles north of Wolverhampton, in Wolverhampton. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Coven is one of 96 places in Wolverhampton where we work. We work right across the region, from Coven to Birmingham (17 miles away).
We cover every part of WV9 and the streets around it. Whether you live on Wood Avenue, Brook Close and Oakshaw Close or anywhere nearby, a technician can come to you. We also cover the places around Coven: Standeford (1 mile north-east), Cross Green (1 mile south-east), Slade Heath (1 mile east), Four Ashes (1 mile north-east) and Crateford (1 mile north). Within a short drive, we also cover Wolverhampton (5 miles south), Bilston (7 miles south-east), Coseley (9 miles south), Wednesfield (5 miles south-east), New Invention (5 miles south-east) and Gornal (10 miles south).
Local landmarks in Coven
Locally, our jobs take us to homes close to St Paul's Church, St Paul's CofE (C) First School and The Anchor Inn and the streets around them. For rail, the closest station is Bilbrook station, roughly 3.3 miles south-west of the centre. A little further out are Cannock Chase Hospital (5 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
