Wolverhampton · England
Bath Repair in Slade Heath
Bath repair in Slade Heath without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Damage beneath the taps
- Hairline or through cracks in acrylic
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- What the surface is made of
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- One picture of the whole bath
- Natural light rather than flash
- What it’s made of, if you know
- Something in shot to show the size
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
About our bath repair in Slade Heath
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the next day. Typical jobs include a chipped rim or side and a cracked acrylic bath, in pressed steel enamel, whirlpool & spa baths and cast iron enamel.
Every repair is covered by a one-year guarantee, wherever you are in Wolverhampton.
- Location
- Slade Heath (WV10)
- Area hub
- Wolverhampton
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed:
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Why repair rather than replace?
People frequently assume a cracked or chipped bath has to come out. Generally it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- Every repair guaranteed for a year
- One price list for the whole UK
- Colour-matched on site
- Normally one visit, start to finish
Take a look at our full price list or bath cost comparison.
Slade Heath and the surrounding area
Slade Heath is about 5 miles north of Wolverhampton, in Wolverhampton. Jobs in Slade Heath are booked in like any other job: a fixed quote from photos, then a visit to do the work. Slade Heath is one of 96 places in Wolverhampton where we work. Our jobs stretch from Slade Heath to Birmingham (16 miles away).
All of WV10 is covered, from the main roads to the quietest streets. Whether you live on Old Stafford Road, Laches Lane and Paradise Lane or a nearby road, we can come to you. Neighbouring places we cover include Cross Green (1 mile south-west), Standeford (1 mile north-west), Coven (1 mile west), Four Ashes (1 mile north) and Coven Heath (1 mile south). Larger places within reach include Wolverhampton (5 miles south), Bilston (7 miles south), Coseley (8 miles south), Wednesfield (4 miles south), New Invention (5 miles south-east) and Gornal (9 miles south).
Landmarks near Slade Heath
Our customers here include homes close to The Anchor Inn, St Paul's Church and St Paul's CofE (C) First School and the streets around them. The closest station to Slade Heath is Bilbrook station, roughly 3.6 miles south-west of the centre. A little further out are Cannock Chase Hospital (4.5 miles north-east) and Cheslyn Hay North and Saredon (2.9 miles east).
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Open a window if you can
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
Get a quote
Email us a photo of the damage and a wider shot of the whole item, and tell us you are in Slade Heath, and we will reply with a fixed price.
Related advice
When a repair is not the answer
It helps to know what we cannot do too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs in Wolverhampton and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
FAQs for Slade Heath
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you cover Slade Heath?
Yes. We work across the UK and come to Slade Heath and the rest of Wolverhampton. Send us photos for a fixed quote, or call 0345 017 0787.
Which areas do you work in?
We work UK-wide, and that includes Slade Heath. Our prices are the same everywhere.
Something went through my bath. Can it be fixed?
Normally. Photos of the hole and the underside help us check.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Nearby places to Slade Heath
What else we do in Slade Heath
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
