Bridgend · Wales
Bath Repair in Coychurch
Chip and crack repairs to enamel, acrylic and cast iron baths in Coychurch, carried out at your home and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Coychurch
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. If you are dealing with holes from dropped items and rusty patches near the plughole, we can typically put it right, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Coychurch (CF35, CF31)
- Area hub
- Bridgend
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Coychurch?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
If you can see any of these, send us a photo:
- Rust spots around the plughole
- Chips along the edge of the bath
- Impact holes in acrylic
- A cracked acrylic bath
Before booking anyone
- Whether the price covers travel
- Whether a trained technician does the job
- How your room will be protected
- What happens if the damage is worse than the photos show
Nearby places to Coychurch
Also in Coychurch
Our work in Coychurch
Coychurch is about 2 miles east of Bridgend, in Bridgend. From the centre of Coychurch to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 91 towns and villages across Bridgend.
Our visits in CF35 and CF31 are booked in the same way as anywhere else. Local streets include Moor Road, Horsefair Road and Brocastle Avenue, all of which we cover. We also cover the places around Coychurch: Coychurch Lower (1 mile north), Treoes (1 mile south-east), Waterton (1 mile west), Corntwn (2 miles south-west) and Hernston (2 miles west). Further out, we also cover Maesteg (9 miles north-west), Porthcawl (8 miles west), Newcastle Higher (3 miles west), Ynysawdre (4 miles north-west), Cefn Glas (3 miles west) and Bryntirion (3 miles west).
What’s near Coychurch
Around Coychurch, we work in homes near Coychurch (Llangrallo) Primary School, Church of St Mary and Star Inn and the streets around them. For rail, the closest station is Bridgend station, roughly 2.1 miles west of the centre. Further afield, we also cover the area around Brocastle (1 mile south) and Designer Outlet Bridgend (3.1 miles north-west). Not far away are Pen Coed-y-mwstwr.
- Local facilities include Llandow/Ewenny (2.1 miles south)
Your questions about bath repair in Coychurch
Do you cover Coychurch?
Yes, we do. Repair technicians travel to Coychurch from across the region, and the price is the same as everywhere else.
What happens next?
We review the photos and send a fixed quote with dates.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How we price bath repair
Repairs from £95. We price every job individually, from your photos. The main factors are:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed price
You can normally get a fixed price without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- The material, if you know it
- A clear, close picture of the problem area
- A picture taken from further back
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Open a window if you can
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Colour-matched on site
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- Most jobs done in one visit
See our pricing and bath cost comparison.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Ensure an acrylic bath is firm underfoot
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
