Cumbria · England
Bath Repair in Crackenthorpe
Our repair technicians come to Crackenthorpe for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- A failed DIY repair that’s discoloured or lifting
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- What the surface is made of
- The colour and finish to match
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Where you are, by postcode
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
For a price in Crackenthorpe, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Bath repair in Crackenthorpe, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and common reasons people contact us are snagging damage from a refit and hairline or through cracks in acrylic.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Where
- Crackenthorpe (CA16)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Crackenthorpe
Also in Crackenthorpe
Landlord and trade work in Crackenthorpe
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
What we are called out for in Crackenthorpe
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
The things clients usually mention when they call include:
- Chips under the taps
- Chips along the edge of the bath
- A kit repair that didn’t last
- Scuffs and scratches in the surface
What your quote should include
- What happens if the damage is worse than the photos show
- Who will actually do the work
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
Common questions in Crackenthorpe
Can you repair a hole in a bath?
Typically. Send us a photo of the hole and one from under the bath if you can.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Keeping it looking good
After the repair has cured, a few habits help it last:
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Crackenthorpe and nearby
Crackenthorpe is about 10 miles south-east of Penrith, in Cumbria. Anywhere in CA16, a technician comes to you. Crackenthorpe is one of 438 towns and villages in Cumbria where we work. Our jobs stretch from Crackenthorpe to Newcastle upon Tyne (45 miles away).
Postcode districts we cover here: CA16. We also travel to Bolton (2 miles north-west), Long Marton (2 miles north), Appleby-in-Westmorland (2 miles south-east), Bongate (2 miles south-east) and Burrells (2 miles south-east). We also work in nearby towns such as Penrith (10 miles north-west), Fair Hill (11 miles north-west), Carleton (9 miles north-west), Kirkby Stephen (11 miles south-east), Alston (15 miles north) and Shap (7 miles south-west).
Near you in Crackenthorpe
In Crackenthorpe, that means homes near Appleby Grammar School and the streets around them. The nearest railway station is Appleby station, roughly 1.8 miles south-east. Well-known places in the area include Appleby Castle (2 miles south-east) and North Westmorland Rural District (within half a mile south-east). Green spaces nearby include Murton Pike.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
