Windsor and Maidenhead · England
Bath chip & crack repair in Cranbourne, Windsor and Maidenhead
Fixed-price bath repair in Cranbourne and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- A cracked acrylic bath
- A failed DIY repair that’s discoloured or lifting
About Cranbourne
Cranbourne is about 3 miles south-west of Windsor, in Windsor and Maidenhead. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Cranbourne is one of 57 places in Windsor and Maidenhead where we work. Our jobs stretch from Cranbourne to London (about 25 miles away).
Postcode districts we cover here: SL4. You will find streets such as Broadway, Berkeley Drive and Central Way. If you’re just outside Cranbourne, we cover Plaistow Green (1 mile south), Woodside (1 mile south), The Village (1 mile east), Winkfield (1 mile west) and Brookside (2 miles south). Larger places within reach include Maidenhead (6 miles north-west), Windsor (3 miles north-east), Boyn Hill (5 miles north-west), Cookham (8 miles north), Furze Platt (7 miles north-west) and Broomhall (4 miles south).
What’s near Cranbourne
Locally, our jobs take us to homes close to Church of St Peter, Windsor Girls' School and The Fleur de Lis pub and the streets around them. Cranbourne’s nearest station is Ascot station, roughly 3 miles south of the centre. Further afield, we also cover the area around Heatherwood Hospital (2.8 miles south) and Windsor Castle (3.7 miles north-east). Not far away are Bray Pit and Virginia Water Lake.
Bath repair at your home in Cranbourne
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include deep scratches in acrylic and damage done while the bathroom was being fitted, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Cranbourne (SL4)
- County
- Windsor and Maidenhead
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
Why us?
- We will tell you if it’s not worth repairing
- A fixed quote before you book
- A year’s guarantee on all work
- Normally one visit, start to finish
Take a look at our pricing or guide to resurfacing and replacement costs.
Cranbourne: your questions answered
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What happens next?
We review the photos and send a fixed quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Places near Cranbourne
Also in Cranbourne
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you are working above it
- Check that an acrylic bath does not move when you stand in it
- Do not leave a fresh chip for long
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It usually takes a few hours, depending on the damage, and you can get on with other things while we are there.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Windsor and Maidenhead and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How we price bath repair
Prices start from £95. There’s no charge for travel to Cranbourne. The price depends on:
- How much damage there is
- Any earlier repairs that need removing first
- The colour and finish to match
- Whether we combine several jobs
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- Something in shot to show the size
- A clear, close picture of the problem area
- Any details about the material
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
When we would advise against a repair
We won’t take on work that will not last, so these are the limits:
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
