North Yorkshire · England
Bath Repair for Cropton homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Cropton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
About our bath repair in Cropton
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for a chipped rim or side and a chip where the taps sit, on roll-top & freestanding, acrylic and whirlpool & spa baths.
You get a one-year guarantee, the same in Cropton as everywhere else we work.
- Location
- Cropton (YO18)
- County
- North Yorkshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Swapping a damaged bath for a new one normally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Prices start from £95. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- We come to you, anywhere in the UK
Take a look at our pricing and resurfacing vs replacement cost guide.
What bath repair costs
Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Previous DIY repairs that have to come out
- Unusual colours or finishes
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- A photo taken from further back
- Natural light rather than flash
- Details of any past repairs
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
FAQs for Cropton
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you come to Cropton?
Yes. We cover the whole UK and travel to Cropton and the rest of North Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
Do you cover the entire of North Yorkshire?
We work UK-wide, and that includes Cropton. Our prices are the same everywhere.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Do you need bath repair in Cropton?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
You may need us if you’ve spotted:
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
Before booking anyone
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- How to look after the finish
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes a few hours, depending on the damage in most cases. The room is left tidy and ready to use once it has cured.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
Before we arrive
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Cropton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Keeping it looking good
It’s all simple stuff:
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Rinse it down after each bath
- Keep metal cans and razors off the surface
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Towns and villages near Cropton
Also in Cropton
Where we work around Cropton
Cropton is about 16 miles south-west of Whitby, in North Yorkshire. From the centre of Cropton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Cropton is one of 626 towns and villages in North Yorkshire we cover. Our jobs stretch from Cropton to Leeds (44 miles away).
All of YO18 is within our area. Whether you live on High Street and Back Lane or anywhere nearby, we can come to you. Other places close to Cropton include Appleton-le-Moors (2 miles south-west), Wrelton (2 miles south), Spaunton (2 miles west), Sinnington (2 miles south) and Middleton (3 miles south-east). Larger places within reach include Malton (11 miles south), Pickering (4 miles south-east), Norton-on-Derwent (12 miles south), Kirkbymoorside (4 miles west), Helmsley (10 miles west) and Thornton-le-Dale (6 miles south-east).
Near you in Cropton
Typical jobs here are in homes near Church of St Gregory and The New Inn, among other places. Other landmarks nearby include Beck Isle Museum (3.9 miles south-east) and Pickering Castle (3.8 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
