North Yorkshire · England

Bath chip & crack repair in Sinnington, North Yorkshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Sinnington, with a one-year guarantee on every repair.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Sinnington homes

Bath repair in Sinnington, done in place

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s chips caused by builders and holes from dropped items, we can help, whatever the material.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Area
Sinnington (YO62)
County
North Yorkshire
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Looking after it afterwards

Looking after the surface is easy:

  • Do not leave a fresh chip for long
  • Keep metal cans and razors off the surface
  • Avoid scourers, wire wool and gritty cream cleaners
  • Give the bath a quick rinse after use

Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

What we’re called out for in Sinnington

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

The things customers generally mention when they call are:

  • Scratches you can feel with a fingernail
  • A hole punched through by something heavy
  • Rusty patches near the plughole
  • Chips on the rim or sides

What to look for in a quote

  • How soon you can use it again
  • What preparation is included
  • How the room is protected while they work
  • Aftercare advice

How to compare quotes

Your questions about bath repair in Sinnington

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders across North Yorkshire.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

Can you repair several things at once?

Of course, and it normally saves money. Just add the extra items to your pictures and you’ll get one combined price.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

What if the damage is worse than the photos show?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

How do I book?

Some photos, your postcode and how to reach you. On the day, access to the room.

Our work in Sinnington

Sinnington is about 18 miles south-west of Whitby, in North Yorkshire. Anywhere in YO62, a technician comes to you. Sinnington is one of 626 places in North Yorkshire where we work. We work right across the region, from Sinnington to Leeds (42 miles away).

Every address in YO62 is within our area. Jobs here include addresses on Main Street, The Green and The Garth and the roads around them. Neighbouring places we cover include Wrelton (1 mile east), Appleton-le-Moors (1 mile north-west), Marton (2 miles south), Cropton (2 miles north) and Middleton (2 miles east). Further out, we also cover Malton (9 miles south), Pickering (3 miles east), Norton-on-Derwent (10 miles south), Kirkbymoorside (3 miles west), Helmsley (8 miles west) and Thornton-le-Dale (6 miles east).

Landmarks near Sinnington

Typical jobs here are in homes near Sinnington Primary School, The Fox And Hounds Inn and Church of All Saints and the streets around them. A little further out are Pickering Castle (3.4 miles east) and Beck Isle Museum (3.4 miles east).

Map of Sinnington © OpenStreetMap contributors

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

How it works

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for two to three hours for most chips from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can

Getting a price

Most clients in Sinnington get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a free quote

Related advice

What your bath is made of matters

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

What bath repair costs

Repairs from £95. We charge the same across the UK, including Sinnington. The price reflects:

  • The colour and finish to match
  • Whether old repairs or coatings need taking off
  • The material and finish
  • How many areas need work

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

When you take your photos, a few simple things make all the difference:

  • A wider photo showing the whole bath
  • Any earlier repairs or coatings
  • Any details about the material
  • Something in shot to show the size

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Acrylic cracks with no access behind them
  • A steel bath rusted through
  • Water coming from the waste or taps rather than the bath

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

Landlords, agents and businesses in Sinnington

For anyone letting property in or around Sinnington, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.