Shropshire · England

Bath Repair in Cruckton

Bath repair in and around Cruckton: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A kit repair that didn’t last
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Cruckton

How we handle bath repair in Cruckton

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We regularly repair whirlpool & spa baths, acrylic and pressed steel enamel, and common reasons people contact us are chips along the edge of the bath and a hole punched through by something heavy.

Every job is backed for twelve months in Cruckton and everywhere else. If something goes wrong with the work, we come back.

Area
Cruckton (SY5)
Area hub
Shropshire
Cover
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Landlords, agents and businesses in Cruckton

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Cruckton and nearby

Cruckton is about 4 miles west of Shrewsbury, in Shropshire. Jobs in Cruckton are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Cruckton is one of 433 places in Shropshire where we work. Our jobs stretch from Cruckton to Birmingham (about 43 miles away).

Here we cover the SY5 postcode area. Neighbouring places we cover include Cruckmeole (1 mile south), Hanwood (1 mile south-east), Hanwood Bank (1 mile east), Arscott (1 mile south) and Yockleton (2 miles west). We also work in nearby towns such as Shrewsbury (4 miles east), Oswestry (15 miles north-west), Coleham (4 miles east), Kingsland (4 miles east), Belle Vue (4 miles east) and Monkmoor (5 miles north-east).

Near you in Cruckton

In Cruckton, that means homes near Church of St Thomas, St Thomas and St Anne CofE Primary School and Hare & Hounds pub, among other places. For rail, the closest station is Shrewsbury station, roughly 4.2 miles north-east. A little further out are Shelton Hospital (2.4 miles north-east) and Rowleys House Museum (3.9 miles north-east). The countryside around Cruckton includes Bomere Pool.

Map of Cruckton © OpenStreetMap contributors

Do you need bath repair in Cruckton?

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

These are the problems we are asked about most:

  • A cracked acrylic bath
  • Rusty patches near the plughole
  • Deep scratches in acrylic
  • A failed DIY repair that’s discoloured or lifting

What to look for in a quote

  • How to care for the finish
  • What happens if the damage is worse than the pictures show
  • Whether the colour is mixed to match
  • Whether a trained technician does the job

Our hiring checklist

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Why repair rather than replace?

A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

What you get with us

  • One price list for the whole UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • Rooms protected and left tidy
  • Colour-matched on site

Read our full price list and guide to resurfacing and replacement costs.

How the visit works

You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the following day.

Preparing for the visit

  • Clear the area around the damage
  • Plan for the room to be out of bounds to pets and children
  • Point us to the nearest place to park

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Get a fixed price

Advice

What affects the price in Cruckton

Repairs from £95. You’ll know the full cost before you book. We look at:

  • How many items we do on one visit
  • The size and number of damaged areas
  • The material and finish
  • The colour and finish to match

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Quotes from your photos

Two or three clear photos are generally enough. It helps if you send:

  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • A picture taken from further back

Most clients in Cruckton get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Water coming from the waste or taps rather than the bath
  • Cracks in parts of an acrylic bath we cannot get to from below
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel

Your questions about bath repair in Cruckton

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

How much does bath repair cost in Cruckton?

Prices start from £95. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.

What areas do you cover?

The whole UK, including all of Shropshire. Send your postcode with your photos and we will offer you dates.

Do you come to Cruckton?

Yes. We work across the UK and travel to Cruckton. Send pictures and we’ll quote, or call 0345 017 0787.

Can you redo an old repair?

Yes. We remove the old filler and start again. Mention it when you send pictures.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.