Shropshire · England
Bath chip & crack repair in Hanwood, Shropshire
Our repair technicians come to Hanwood for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Chips on the rim or sides
Bath repair in Hanwood, done in place
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Our repair technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people get in touch are an old repair that has yellowed or come loose and rust spots around the plughole.
All of our repairs are guaranteed for twelve months in Hanwood and everywhere else. We return to put right any problem with the work.
- Location
- Hanwood (SY5)
- Area hub
- Shropshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There is no charge for travel to Hanwood. The price depends on:
- What kind of damage it is
- How many areas need work
- Whether old repairs or coatings need taking off
- The material
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- A picture taken from further back
- A coin or ruler next to the damage for scale
- Natural light rather than flash
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
FAQs for Hanwood
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Something went through my bath. Can it be fixed?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
How much does bath repair cost in Hanwood?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you cover the entire of Shropshire?
The whole UK, including all of Shropshire. Send your postcode with your pictures and we will confirm dates.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Repairing versus replacing in Hanwood
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
What you get with us
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
See our pricing or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Hanwood
If you manage property in Hanwood, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It normally takes a morning or an afternoon, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know about parking or access
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Getting a price
Email us pictures of the damage and a wider shot of the whole item, with your SY5 postcode, and we’ll reply with a fixed quote.
Read more
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Use a soft cloth and washing-up liquid for everyday cleaning
- Cover the bath during DIY or decorating
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Do you need bath repair in Hanwood?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
The most common problems we’re called about are:
- A chipped rim or side
- Impact holes in acrylic
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Questions to ask before you book
- How the room is protected while they work
- Aftercare advice
- What happens if they find more damage
- Whether they match the colour on site
Places near Hanwood
Other services in Hanwood
About Hanwood
Hanwood is about 4 miles south-west of Shrewsbury, in Shropshire. We travel to homes and businesses in Hanwood and the surrounding area, so there is no workshop to go to. Hanwood is one of 433 places in Shropshire where we work. We work right across the region, from Hanwood to Birmingham (about 42 miles away).
All of SY5 is covered, from the main roads to the quietest streets. That includes homes on Chestnut Close, Weir Road and Woodlands Avenue and the roads around them. Other places close to Hanwood include Cruckmeole (1 mile west), Hanwood Bank (1 mile north-east), Cruckton (1 mile north-west), Arscott (1 mile south) and Longden (2 miles south). Within a short drive, we also cover Shrewsbury (4 miles north-east), Coleham (4 miles north-east), Kingsland (4 miles north-east), Belle Vue (4 miles north-east), Monkmoor (5 miles north-east) and Bagley (4 miles north-east).
What’s near Hanwood
In Hanwood, that means homes near St Thomas and St Anne CofE Primary School, Hare & Hounds pub and Church of St Thomas and the streets around them. Hanwood’s nearest station is Shrewsbury station, roughly 3.9 miles north-east. A little further out are Stapleton Motte (3.6 miles south-east) and The Parade Shopping Centre (2.4 miles north-east). The countryside around Hanwood includes Bomere Pool.
About our accreditations · Every repair comes with a one-year guarantee.
