Moray · Scotland
Bath Re-enamelling for Cullen homes
Full bath re-enamelling and resurfacing at your home in Cullen, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Bath re-enamelling at your home in Cullen
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We’re frequently asked to fix a bath that stays dull however much you clean it and lots of chips and rust spots, on cast iron baths, pressed steel baths and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Cullen (AB56)
- County
- Moray
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Landlords, agents and businesses in Cullen
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, pictures and access details.
What affects the price in Cullen
Prices start from £350. Prices are worked out job by job. What matters most is:
- The type of damage
- Whether old repairs or coatings need taking off
- The material and finish
- Access to the area
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A picture taken from further back
Upload a photo of the damage and one of the whole item, and tell us you are in Cullen, and we will come back with a fixed quote.
Other services in Cullen
Common problems we fix in Cullen
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Look out for these signs:
- An old resurfacing that’s failing
- Stains that will not shift
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Questions to ask before you book
- What preparation is included
- How changes to the job are handled
- A fixed price, and whether VAT is included
- If travel is included in the price
Common questions in Cullen
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Our work in Cullen
Cullen is about 6 miles east of Buckie, in Moray. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Cullen is one of 58 towns and villages in Moray we cover.
Every address in AB56 is within our area. Local streets include The Square, Station Road and Old Church Road, all of which we cover. Cullen sits on or near the A98, which makes travel easy. Neighbouring places we cover include Lintmill (1 mile south), Portknockie (2 miles north-west), Sandend (3 miles east), Buckpool (3 miles west) and Findochty (3 miles west). Within a short drive, we also cover Buckie (6 miles west), Keith (11 miles south-west), Fochabers (12 miles south-west), Ianstown (5 miles west), Lhanbryde (15 miles west) and Portessie (5 miles west). Being one of Moray’s larger places, Cullen sees plenty of our work. If you are somewhere remote, ring us first and we’ll plan the trip.
Landmarks near Cullen
In Cullen, that means homes near Auction House, among other places. Other landmarks nearby include Fordyce Joiner's Workshop (3.4 miles south-east) and castle 30m NNW of Inaltry (2.5 miles south). Open spaces near Cullen include Durn Hill.
Repair or replace in Cullen?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before booking.
Why us?
- No need to remove anything
- Most jobs done in one visit
- We come to you, anywhere in the UK
- A year’s guarantee on all work
Read our full price list and bath cost comparison.
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take most of the day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
