Kent · England
Bath Re-enamelling in Culmers
Full bath re-enamelling and resurfacing for homes and businesses in Culmers and across Kent. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Several chips and rust patches
Signs you need bath re-enamelling in Culmers
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people contact us when they notice one of these:
- Several chips and rust patches
- A coating lifting around the plughole
- Wear marks under the taps
- Brown or grey marks that do not clean off
Comparing quotes
- How your room will be protected
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
About our bath re-enamelling in Culmers
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with an original cast iron bath that needs restoring and a coloured bath you want in white, we can help, on cast iron baths, acrylic baths and basins & shower trays alike.
Big or small, it’s backed by a one-year guarantee in Culmers and across Kent.
- Location
- Culmers (ME13)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
In fairness, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Culmers and nearby
Culmers is about 2 miles east of Faversham, in Kent. We travel to customers in Culmers and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover 922 places in Kent. Our jobs stretch from Culmers to London (about 46 miles away).
Here we cover the ME13 postcode area. We also cover the places around Culmers: Graveney (1 mile north-east), Goodnestone (1 mile south-west), Broom Street (1 mile north-west), Slutshole (1 mile south-east) and Hernhill (1 mile south-east). We also work in nearby towns such as Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (4 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
Near you in Culmers
Typical jobs here are in homes near Church of All Saints, Graveney Primary School and Queen Elizabeth's Grammar School. The nearest railway station is Faversham station, about 2.2 miles west. Further afield, we also cover the area around Whitstable and Tankerton Hospital (5.5 miles north-east). The countryside around Culmers includes Blean Woods RSPB Reserve.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What else we do in Culmers
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Every repair guaranteed for a year
- One visit for most repairs
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Read our pricing and bath cost comparison.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- The size and number of damaged areas
- How hard the colour is to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Where you are, by postcode
- The material, if you know it
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Questions from Culmers
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How much does bath re-enamelling cost in Culmers?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your ME13 postcode.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you price it without visiting?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
About our accreditations · Every repair comes with a one-year guarantee.
