Cornwall · England
Bath Repair for Cury homes
Fixed-price bath repair in Cury and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
About our bath repair in Cury
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are chips along the edge of the bath and an old repair that has yellowed or come loose.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Cury (TR12)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Cury
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
So the finish stays in good condition for years:
- Clean with warm water and a mild detergent
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
What bath repair costs
Repairs from £95. We do not charge extra for travel to Cury. The price depends on:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- The colour and finish to match
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- A wider photo showing the whole bath
- Any details about the material
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Towns and villages near Cury
What else we do in Cury
When to call us in Cury
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- A kit repair that didn’t last
- Rust spots around the plughole
- A cracked acrylic bath
Questions to ask before booking
- What aftercare is recommended
- Whether the price covers travel
- What the guarantee covers, and for how long
- Whether they match the colour on site
Where we work around Cury
Cury is about 4 miles south of Helston, in Cornwall. Across the TR12 area, we come to you. Cury is one of 644 places in Cornwall where we work.
Postcode districts we cover here: TR12. We regularly work on streets such as Church Road, Parc Enys and Parknoweth. Nearby, we also work in White Cross (1 mile north-east), Cross Lanes (1 mile east), Mullion (1 mile south), Meaver (2 miles south) and Berepper (2 miles north-west). Larger places within reach include Falmouth (10 miles north-east), Camborne (12 miles north), Redruth (13 miles north), Penzance (14 miles west), Helston (4 miles north) and Hayle (12 miles north-west).
Local landmarks in Cury
We visit homes around St Corentine’s Church, Mullion School and Cury CofE Primary School and the streets around them. Nearby you’ll also find Helston Castle (4 miles north-west) and Helston Community Hospital (3.3 miles north). Open spaces near Cury include Goonhilly Downs and The Loe.
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Cury
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Cury: your questions answered
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
How long does the repair take to cure?
Usually the day after. We will tell you the exact curing time when we finish.
What areas do you cover?
All of Cornwall, and the rest of the UK. Travel is included in the price.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Repairing versus replacing in Cury
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Our bath repair starts from £95. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
