Neath Port Talbot · Wales
Bath Repair in Cynonville
We travel to Cynonville for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
Bath repair at your home in Cynonville
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. If you are dealing with snagging damage from a refit and impact holes in acrylic, we can help, on roll-top & freestanding, cast iron enamel and pressed steel enamel alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Cynonville (SA13)
- Area hub
- Neath Port Talbot
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- We leave the room as we found it
- Same prices wherever you are
- One-year guarantee on every repair
Take a look at our full price list and guide to resurfacing and replacement costs.
Keeping it looking good
So the finish stays in good condition:
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
- Don’t scrub with anything abrasive
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
About Cynonville
Cynonville is about 3 miles north-west of Maesteg, in Neath Port Talbot. Across the SA13 area, a technician comes to you. Cynonville is one of 100 places in Neath Port Talbot we cover.
Our technicians cover all of SA13 and the streets around it. From Percy Road and Pen-Twyn Road or a nearby road, we can come to you. If you’re just outside Cynonville, we cover Duffryn (1 mile east), Abercregan (2 miles north-east), Brynheulog (2 miles east), Caerau (2 miles east) and Dyffryn (2 miles south-east). Within a short drive, we also cover Neath (5 miles west), Port Talbot (5 miles south-west), Sandfields (6 miles south-west), Mount Pleasant (5 miles west), Baglan Moors (5 miles south-west) and Sandfields West (6 miles south-west).
Landmarks near Cynonville
The nearest railway station is Maesteg station, about 3 miles south-east. Other landmarks nearby include Pelenna (2.4 miles west) and Maesteg Community Hospital (2.6 miles south-east). The countryside around Cynonville includes Foel Trawsnant and Gnoll Estate Country Park lake 1.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes two to three hours for most chips, and we will tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Clear the area around the damage
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Read more
What affects the price in Cynonville
Repairs from £95. There’s no area surcharge for Cynonville. The price reflects:
- The size and number of damaged areas
- Where the damage is and how we get to it
- The colour and finish to match
- What kind of damage it is
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A wider photo showing the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
When to call us in Cynonville
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Get in touch if you’ve noticed any of these:
- A kit repair that didn’t last
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
Questions to ask before you book
- How your room will be protected
- Aftercare advice
- When it can be used again
- Who turns up on the day
Nearby places to Cynonville
More services for Cynonville
Questions from Cynonville
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does the repair take to cure?
Usually the following day. We will tell you the exact curing time when we finish.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
