Aberdeen · Scotland
Bath Repair for Danestone homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Danestone. Send photos for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
Keeping it looking good
After the repair has cured, a few habits help it last:
- Rinse it down after each bath
- Get a dripping tap fixed promptly
- Have new chips seen to early
- Do not scrub with anything abrasive
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Bath repair in Danestone, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. We regularly repair roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and people most often call us about rusty patches near the plughole and scuffs and scratches in the surface.
Whatever the size of the job, you get the same one-year guarantee in Danestone and across Aberdeen.
- Area
- Danestone (AB22, AB24, AB21)
- Region
- Aberdeen
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Danestone questions
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Aberdeen.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Repair or replace in Danestone?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Most jobs done in one visit
- One price list for the whole UK
- Everything repaired in place
- CHAS and Constructionline accredited
Read our prices page or bath cost comparison.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
Do you need bath repair in Danestone?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
People generally call us when they notice something like this:
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What to look for in a quote
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- How soon you can use it again
- Who turns up on the day
Where we work around Danestone
Danestone is about 2 miles north of Aberdeen, in Aberdeen. Across the AB22 area, we carry out the work at your property. Our technicians cover 63 places across Aberdeen, from the larger towns to small villages.
We cover every part of AB22, AB24 and AB21. Streets in the area include Laurel Road, Laurel Lane and Society Lane, all of which we cover. If you are just outside Danestone, we cover Donside Village (1 mile south-east), Tillydrone (1 mile south-east), Cummings Park (1 mile south-west), Cornhill (1 mile south) and Northfield (1 mile south-west). Further out, we also cover Ferryhill (3 miles south), New Aberdeen (3 miles south-east), Dyce (3 miles north-west), Queen's Cross (3 miles south), Portlethen (8 miles south) and Cults (5 miles south).
Local landmarks in Danestone
Our customers here include homes close to Bridge of Don Academy, Library and Stewart Park and the streets around them. Nearby too are St Machar Academy (1.3 miles south-east) and Danestone Congregational Church (less than half a mile north). The closest station to Danestone is Dyce station, roughly 2.9 miles north-west of the centre. Other landmarks nearby include Bon Accord Centre (2.5 miles south-east) and King's Museum (1.5 miles south-east). Open spaces near Danestone include Rubislaw Quarry and Perwinnes Hill.
Towns and villages near Danestone
Also in Danestone
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- The material and finish
- The size and number of damaged areas
- Any earlier repairs that need removing first
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Details of any past repairs
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
Send us pictures and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
