Kent · England
Bath chip & crack repair in Denton, Kent
Bath repair for Denton, without a refit. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Impact holes in acrylic
- Cracks in an acrylic bath
Why repair rather than replace?
Replacing a fitted bath generally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Denton customers choose us
- We leave the room as we found it
- No need to remove anything
- One price list for the entire UK
- We’ll tell you if it’s not worth repairing
See our full price list or resurfacing vs replacement cost guide.
Bath repair at your home in Denton
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the next day. We are often asked to fix a chipped rim or side and an old repair that has yellowed or come loose, across whirlpool & spa baths, acrylic and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Denton (CT4)
- Region
- Kent
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Also near Denton
What else we do in Denton
Our work in Denton
Denton is about 6 miles north-west of Dover, in Kent. From the centre of Denton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Denton is one of 922 places in Kent we cover. We work right across the region, from Denton to London (about 59 miles away).
Postcode districts we cover here: CT4. From The Street and Canterbury Road or a nearby road, a technician can come to you. If you are just outside Denton, we cover Lodge Lees (1 mile west), Wootton (1 mile south-east), Shelvin (1 mile east), Breach (1 mile west) and Selsted (2 miles south). We also work in nearby towns such as Ashford (13 miles west), Canterbury (8 miles north-west), Dover (6 miles south-east), Folkestone (7 miles south), Ramsgate (15 miles north-east) and Whitstable (13 miles north-west).
Local landmarks in Denton
We visit homes around The Jackdaw Inn, Church of St Mary Magdalene and Jumping Downs and the streets around them. Denton’s nearest station is Shepherds Well station, roughly 2.7 miles east of the centre. Open spaces near Denton include Cheriton Hill.
For landlords and businesses
If you manage property in Denton, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse it down after each bath
- Don’t leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
- Keep abrasive pads and gritty cleaners away from the bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- How many items we do on one visit
- What the surface is made of
- How much damage there is
- Access to the area
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- Details of any past repairs
- What it’s made of, if you know
- A photo taken from further back
Upload pictures of the damage and one of the entire item, with your CT4 postcode, and we will reply with a fixed price.
How the visit works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
How to prepare
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
When to call us in Denton
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
It’s worth getting a quote if you see:
- A cracked acrylic bath
- Holes from dropped items
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What your quote should include
- How changes to the job are handled
- Who will actually do the work
- What aftercare is recommended
- What prep work is covered
Denton: your questions answered
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first.
About our accreditations · Every repair comes with a one-year guarantee.
