Dundee · Scotland
Bath chip & crack repair in Drumsturdy, Dundee
Our technicians come to Drumsturdy for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- Impact holes in acrylic
About Drumsturdy
Drumsturdy is about 2 miles north-east of Broughty Ferry, in Dundee. Anywhere in DD5, a technician comes to you. Drumsturdy is one of 50 towns and villages in Dundee we cover. You can also see our page for Edinburgh, about 41 miles away.
Here we cover the DD5 postcode area. Other places close to Drumsturdy include Kingennie (1 mile north-west), Newbigging (1 mile north-east), Wellbank (1 mile north-west), Bucklerheads (2 miles west) and Monikie (2 miles north-east). Further out, we also cover Dundee (6 miles south-west), Stobswell (5 miles south-west), Blackness (7 miles south-west), Logie (7 miles south-west), St Marys (7 miles west) and Downfield (6 miles west).
Around Drumsturdy
We visit homes around Newbigging Parish Church And War Memorial and Monifieth High School. The nearest railway station is Monifieth station, roughly 2.1 miles south-east. A little further out are James Guthrie Orchar Art Gallery (3.2 miles south) and Ashludie Hospital (1.5 miles south-east). Open spaces near Drumsturdy include Trottick Mill Ponds.
How we handle bath repair in Drumsturdy
Most of our bath repairs take a few hours, and you can usually bathe again the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Our repair technicians work on acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about a kit repair that didn’t last and rusty patches near the plughole.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Drumsturdy (DD5)
- Region
- Dundee
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Also near Drumsturdy
What else we do in Drumsturdy
What bath repair costs
Repairs from £95. You will know the full cost before booking. We take into account:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- Unusual colours or finishes
- The material and finish
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- One sharp close-up of the damage
- One picture of the entire bath
- Your postcode, so we can check dates
- The material, if you know it
Email us a picture of the damage and a wider shot of the entire item, with your DD5 postcode, and we will come back with a fixed quote.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
When to call us in Drumsturdy
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- A chipped rim or side
- Damage beneath the taps
- Impact holes in acrylic
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- If travel is included in the price
- How long it needs to cure
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Drumsturdy
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
How to care for the repair
Most damage we see is avoidable. A few tips:
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Don’t scrub with anything abrasive
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Your questions about bath repair in Drumsturdy
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you cover Drumsturdy?
Yes. We cover the whole UK and travel to Drumsturdy and the rest of Dundee. Send photos and we will quote, or call 0345 017 0787.
Landlords, agents and businesses in Drumsturdy
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams in Dundee and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
