Oxfordshire · England
Bath chip & crack repair in Dry Sandford, Oxfordshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Dry Sandford, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- A hole punched through by something heavy
Bath repair in Dry Sandford, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. Our repair technicians work on whirlpool & spa baths, acrylic and roll-top & freestanding, and people most frequently call us about a kit repair that didn’t last and chips caused by builders.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Dry Sandford (OX13)
- Area hub
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The material
- The size and number of damaged areas
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Phone pictures are fine. Just make sure we can see:
- The material, if you know it
- A photo taken from further back
- A close-up of the damage, in focus
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Common problems we fix in Dry Sandford
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Common reasons people in Dry Sandford contact us are:
- An old repair that has yellowed or come loose
- A chip where the taps sit
- Rust by the waste and overflow
- Snagging damage from a refit
Questions to ask before booking
- How soon you can use it again
- What protection goes down before work starts
- What aftercare is recommended
- What happens if the damage is worse than the photos show
Towns and villages near Dry Sandford
Other services in Dry Sandford
FAQs for Dry Sandford
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What areas do you cover?
All of Oxfordshire, and the rest of the UK. Travel is included in the price.
Will I be able to see the repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Dry Sandford and the surrounding area
Dry Sandford is about 2 miles north-west of Abingdon-on-Thames, in Oxfordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 443 places across Oxfordshire, from the larger towns to small villages. Our nearest city page is London, about 55 miles away.
Here we cover the OX13 postcode area. We also travel to Cothill (1 mile south-west), Shippon (2 miles south-east), Frilford Heath (2 miles south-west), Tubney (2 miles south-west) and Marcham (2 miles south). Further out, we also cover Oxford (5 miles north-east), Didcot (7 miles south-east), Witney (9 miles north-west), Carterton (12 miles west), Thame (15 miles east) and Wantage (9 miles south-west).
Landmarks near Dry Sandford
In Dry Sandford, that means homes near Merry Miller pub, Larkmead School and Dry Sandford Primary School. Dry Sandford’s nearest station is Radley station, about 3.8 miles east. Other landmarks nearby include FitzHarris Castle (2.5 miles south-east) and Abingdon Community Hospital (2.3 miles south-east). Open spaces near Dry Sandford include Parsonage Moor and Cumnor Hill.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the following day, the bath is ready to use.
Preparing for the visit
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
How to get a price
Send us a photo of the damage and one of the whole item, and tell us you are in Dry Sandford, and we’ll come back with a fixed quote.
Read more
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
- Make sure an acrylic bath is firm underfoot
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
