Cheshire East · England
Bath chip & crack repair in Eaton, Cheshire East
Problem with your bath in Eaton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Chips caused by builders
For landlords and businesses
If you manage property in Eaton, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Bath repair at your home in Eaton
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair acrylic, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are hairline or through cracks in acrylic and scuffs and scratches in the surface.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Eaton (CW12)
- County
- Cheshire East
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Open a window if you can
- Tell us about parking, stairs or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
Eaton and nearby
Eaton is about 2 miles north of Congleton, in Cheshire East. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Eaton is one of 254 places in Cheshire East where we work. We work right across the region, from Eaton to Manchester (about 20 miles away).
Postcode districts we cover here: CW12. Whether you live on Crauford Road, School Lane and Macclesfield Road or a nearby road, we can come to you. We also cover the places around Eaton: Havannah (1 mile south), Buglawton (1 mile south), North Rode (1 mile east), Key Green (2 miles south-east) and Cloud Side (2 miles south-east). Within a short drive, we also cover Crewe (12 miles south-west), Macclesfield (6 miles north-east), Wilmslow (10 miles north), Knutsford (11 miles north-west), Middlewich (10 miles west) and Sandbach (8 miles south-west).
Near you in Eaton
Our clients here include homes close to Eaton Bank Academy, Dane Valley High School and Christ Church, among other places. For rail, the closest station is Congleton station, roughly 2.1 miles south of the centre. A little further out are Parkside Hospital (5.4 miles north). Not far away are Black Firs Wood Nature Reserve and The Cloud.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Places near Eaton
More services for Eaton
Common questions in Eaton
Can you repair something that’s been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
Do you come to Eaton?
We do. Technicians travel to Eaton from across the region, with no extra charge for travel.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Is a holed acrylic bath repairable?
Usually. Send us a picture of the hole and one from under the bath if you can.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
When to call us in Eaton
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Look out for any of the following:
- Damage beneath the taps
- Chips caused by builders
- A cracked acrylic bath
- A kit repair that didn’t last
Comparing quotes
- Who will actually do the work
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- What aftercare is recommended
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Usually one visit, start to finish
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Read our prices page or bath cost comparison.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath doesn’t move when you stand in it
- Get any new chip repaired before it rusts
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What a repair can’t fix
It helps to know what we cannot do too:
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
What bath repair costs
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- How many areas need work
- The colour and finish to match
- Access to the area
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can usually get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- One picture of the entire bath
If you’re in Eaton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
