Cheshire East · England
Bath Repair for Havannah homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Havannah, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- A failed DIY repair that is discoloured or lifting
About our bath repair in Havannah
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Common call-outs are for scuffs and scratches in the surface and a chip where the taps sit, in whirlpool & spa baths, pressed steel enamel and cast iron enamel.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Havannah (CW12)
- Area hub
- Cheshire East
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Havannah
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What areas do you cover?
Across the UK, and that includes Havannah. Prices don’t change with location.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
When can I have a bath again?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
How we price bath repair
Repairs from £95. You’ll know the full cost before you book. We look at:
- What the surface is made of
- How hard the colour is to match
- Where the damage is and how we get to it
- How many areas need work
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
When a repair is not the answer
It helps to know what we cannot do:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Where we work around Havannah
Havannah is about 1 mile north-east of Congleton, in Cheshire East. Clients in Havannah get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Havannah is one of 254 towns and villages in Cheshire East we cover. Our nearest city page is Manchester, about 21 miles away.
We work across CW12 and the streets around it. That includes homes on Adler Road, Dixon Road and Harvey Road and the roads around them. Havannah sits on or near the A5356, which makes travel easy. Close by, we cover Buglawton (1 mile south), Eaton (1 mile north), Key Green (1 mile south-east), North Rode (2 miles north-east) and Timbersbrook (2 miles south-east). Further out, we also cover Crewe (12 miles south-west), Macclesfield (6 miles north-east), Wilmslow (11 miles north), Nantwich (15 miles south-west), Knutsford (11 miles north-west) and Middlewich (10 miles west).
Landmarks near Havannah
Around Havannah, we work in homes near Christ Church, Dane Valley High School and Havannah Primary School and the streets around them. The nearest railway station is Congleton station, roughly 1.4 miles south. Nearby you’ll also find Mow Cop Castle (4.6 miles south). For a walk, there’s Astbury Mere and The Cloud.
Signs you need bath repair in Havannah
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Look out for these signs:
- Scratches you can feel with a fingernail
- Chips under the taps
- A cracked acrylic bath
- A hole punched through by something heavy
What to look for in a quote
- If travel is included in the price
- How to look after the finish
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
Also near Havannah
Also in Havannah
The process
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It typically takes a morning or an afternoon, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Open a window if you can
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Related advice
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
- Do not leave razors or cans standing in the bath
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
