Coventry · England

Bath Repair in Eaves Green

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Eaves Green and across Coventry. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Damage beneath the taps
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Eaves Green

Prices and what affects them

Prices start from £95. We give every job a fixed price from pictures. These are the things that affect it:

  • The type of damage
  • Where the damage is and how we get to it
  • Doing more than one item at once
  • What the surface is made of

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed quote

You can take the pictures on your phone. Just make sure we can see:

  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • Any details about the material
  • The postcode, so we can plan the visit

To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.

How we handle bath repair in Eaves Green

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are chips on the rim or sides and a chip where the taps sit.

Every job is backed for twelve months in Eaves Green and everywhere else. We return to put right any problem with the work.

Location
Eaves Green (CV7)
Area hub
Coventry
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Rinse the bath after use, especially in hard water areas
  • Do not leave a fresh chip for long
  • Protect the bath with a towel when doing jobs nearby
  • Avoid scourers, wire wool and gritty cream cleaners

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

How it works

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area

Getting a price

Send us a picture of the damage and a wider shot of the entire item, with your CV7 postcode, and we’ll come back with a fixed quote.

Get a free quote

Related advice

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book.

Why book with us

  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • Accredited with CHAS, Constructionline and SafeContractor
  • Straight answers about what a repair can do

See our full price list and guide to resurfacing and replacement costs.

Honest limits

We will not take on work that won’t last, so here’s what a repair cannot put right:

  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath
  • Acrylic cracks with no access behind them

If in doubt, send photos and we’ll say what we think.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding

Covering Eaves Green

Eaves Green is about 5 miles west of Coventry, in Coventry. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Eaves Green is one of 88 towns and villages in Coventry we cover. Our nearest city page is Birmingham, about 12 miles away.

Here we cover the CV7 postcode area. Streets in the area include Eaves Green Lane, Lodge Green Lane and Showell Lane. Neighbouring places we cover include Millison's Wood (1 mile south-east), Meriden (1 mile west), Hollyberry End (1 mile north-east), Kinwalsey (1 mile north) and Four Oaks (1 mile south). We also work in nearby towns such as Coventry (5 miles east), Hillfields (6 miles east), Bishopsgate Green (5 miles east), Radford (5 miles east), Ernesford Grange (8 miles south-east) and Foleshill (7 miles east).

What’s near Eaves Green

Locally, our jobs take us to homes close to Meriden Church of England Primary School, Church of St Lawrence and Packington Park and the streets around them. Eaves Green’s nearest station is Berkswell station, about 3.2 miles south. Well-known places in the area include Berkswell Village Museum (2.4 miles south) and Catherine-de-Barnes Isolation Hospital (5.2 miles west).

Map of Eaves Green © OpenStreetMap contributors

When to call us in Eaves Green

Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Keep an eye out for these signs:

  • Rust by the waste and overflow
  • A failed DIY repair that’s discoloured or lifting
  • Damage done while the bathroom was being fitted
  • A cracked acrylic bath

Comparing quotes

  • Who turns up on the day
  • Whether the price is fixed and includes VAT
  • How long the guarantee is and what it covers
  • Whether the colour is mixed to match

Choosing a repair company

FAQs for Eaves Green

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Which areas do you work in?

We work UK-wide. Our prices are the same everywhere.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Do you come to Eaves Green?

Yes. We cover the whole UK and travel to Eaves Green. Send us pictures for a fixed quote, or call 0345 017 0787.

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.