Coventry · England
Bath chip & crack repair in Meriden, Coventry
Bath repair in and around Meriden: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips on the rim or sides
Meriden: your questions answered
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What areas do you cover?
Everywhere in the UK, Meriden included. Travel is included in the price.
Bath repair in Meriden, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair whirlpool & spa baths, cast iron enamel and acrylic, and people most frequently call us about a hole punched through by something heavy and damage beneath the taps.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Meriden (CV7)
- County
- Coventry
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
After the repair has cured, a few habits help it last:
- If an acrylic bath flexes, have its feet adjusted
- Give the bath a quick rinse after use
- Don’t scrub with anything abrasive
- Put a towel in the bath if you are working above it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Towns and villages near Meriden
Other services in Meriden
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common problems we fix in Meriden
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Send us a picture if you notice any of these:
- Chips on the rim or sides
- Chips caused by builders
- A chip where the taps sit
- Rusty patches near the plughole
Comparing quotes
- Whether a trained technician does the job
- If travel is included in the price
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Covering Meriden
Meriden is about 6 miles west of Coventry, in Coventry. We visit clients in Meriden, so you do not need to take anything anywhere. We cover all 88 towns and villages across Coventry, from the larger towns to small villages. You can also see our page for Birmingham, about 11 miles away.
Our visits in CV7 are booked in the same way as anywhere else. Local streets include Alspath Road, Fairfield Rise and The Croft. Being close to the B4104, Meriden is simple for us to get to. Nearby, we also work in Eaves Green (1 mile east), Four Oaks (1 mile south), Millison's Wood (2 miles east), Kinwalsey (2 miles north-east) and Berkswell (2 miles south). We also work in nearby towns such as Coventry (6 miles east), Hillfields (6 miles east), Bishopsgate Green (6 miles east), Radford (6 miles east), Ernesford Grange (8 miles east) and Foleshill (7 miles east).
Landmarks near Meriden
In Meriden, that means homes near The Bull's Head Hotel, Meriden Church of England Primary School and Church of St Lawrence. The closest station to Meriden is Hampton-In-Arden station, roughly 2.4 miles west of the centre. Nearby you’ll also find Allesley Castle (3.8 miles east) and Berkswell Village Museum (2 miles south).
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Unusual colours or finishes
- What the surface is made of
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Natural light rather than flash
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we will explain it before carrying on.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Let us know about parking or access
How to get a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
When a repair isn’t the answer
It helps to know what we can’t do too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly.
Materials we work on in Meriden
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- No need to remove anything
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
See our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
