Derbyshire · England
Bath chip & crack repair in Eckington, Derbyshire
Bath repair for Eckington, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Chips under the taps
- Chips on the rim or sides
When a repair isn’t the answer
A repair is not right for every job, for example:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Bath repair in Eckington, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include chips on the rim or sides and chips caused by builders, across acrylic, roll-top & freestanding and pressed steel enamel.
Whatever the size of the job, it’s backed by a one-year guarantee in Eckington and across Derbyshire.
- Area
- Eckington (S21)
- County
- Derbyshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Eckington
When can I have a bath again?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Should you replace it?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Eckington
- Fixed prices from your photos
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- No extra charge for your area
Take a look at our prices page and bath cost comparison.
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Let the surface dry out before the visit
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Places near Eckington
What else we do in Eckington
Prices and what affects them
Prices start from £95. There’s no charge for travel to Eckington. The price depends on:
- The size and number of damaged areas
- The colour and finish to match
- Previous DIY repairs that have to come out
- The material
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- Your postcode, so we can check dates
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Any details about the material
To get a price, send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Do not leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Landlord and trade work in Eckington
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Covering Eckington
Eckington is about 3 miles north of Staveley, in Derbyshire. Anywhere in S21, we carry out the work at your property. We work in 532 places in Derbyshire, from the larger towns to small villages. You can also see our page for Leeds, about 35 miles away.
Here we cover the S21 postcode area. Local streets include High Street, Market Street and Station Road, and we cover them all. Other places close to Eckington include Bramley (1 mile west), Marsh Lane (1 mile west), Plumbley (1 mile north-west), Mosborough (1 mile north) and Ford (2 miles north-west). Further out, we also cover Chesterfield (5 miles south-west), Dronfield (4 miles west), Bolsover (6 miles south-east), Staveley (3 miles south), Matlock (14 miles south-west) and Clay Cross (10 miles south).
Near you in Eckington
In Eckington, that means homes near Eckington Junior School, St Luke and Eckington School, among other places. Eckington’s nearest station is Woodhouse station, roughly 3.9 miles north. Other landmarks nearby include Chesterfield Royal Hospital (5 miles south) and Crystal Peaks (2.5 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
