Somerset · England
Bath Repair for Egford homes
Bath repair for Egford, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- A chip where the taps sit
- Impact holes in acrylic
Bath repair at your home in Egford
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s chips caused by builders and cracks in an acrylic bath, we can generally put it right, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Area
- Egford (BA11)
- County
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Egford
How long does the repair take to cure?
Typically within a day, depending on the repair.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you come to Egford?
We do. Repair technicians travel to Egford from across the region, and the price is the same as everywhere else.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you cover the whole of Somerset?
All of Somerset, and the rest of the UK. Travel is included in the price.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse the bath after use, especially in hard water areas
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Our work in Egford
Egford is about 1 mile west of Frome, in Somerset. Our repair technicians come to customers in Egford and nearby villages, so nothing has to leave your home. Egford is one of 640 towns and villages in Somerset we cover.
We work across the BA11 postcode area and the streets around it. If you are just outside Egford, we cover Hapsford (1 mile north), Frome (1 mile east), Little Keyford (1 mile south-east), Tytherington (2 miles south) and Ridgeway (2 miles south-west). We also work in nearby towns such as Wells (14 miles west), Midsomer Norton (7 miles north-west), Shepton Mallet (9 miles west), Radstock (6 miles north-west), Wincanton (13 miles south) and Castle Cary (12 miles south-west).
What’s near Egford
Typical jobs here are in homes near Trinity Church of England First School, Church of the Holy Trinity and North Hill House School and the streets around them. The closest station to Egford is Frome station, about 1.5 miles east. Nearby you will also find Nunney Castle (2.1 miles south-west). Not far away are Orchardleigh Lake and Vallis Vale.
Landlords, agents and businesses in Egford
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Prices and what affects them
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- The colour and finish to match
- How many areas need work
- Access to the area
- The material and finish
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Repair or replace: which is better?
Many people think a damaged bath means a new one. Typically it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
What you get with us
- No extra charge for your area
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- One visit for most repairs
See our full price list and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
How it works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Places near Egford
Also in Egford
What a repair cannot fix
We will always be straight with you, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Egford
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
