Conwy · Wales
Bath Repair for Eglwysbach homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Eglwysbach, carried out at your home and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- Impact holes in acrylic
How we price bath repair
Prices start from £95. You will know the full cost before booking. We take into account:
- How many areas need work
- Previous DIY repairs that have to come out
- How many items we do on one visit
- Unusual colours or finishes
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can generally get a fixed quote without us visiting. To make it quick:
- Natural light rather than flash
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
For a price in Eglwysbach, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Bath repair in Eglwysbach, done in place
You do not need a new bath because of a chip. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. Common call-outs are for chips under the taps and scratches you can feel with a fingernail, in acrylic, pressed steel enamel and cast iron enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Eglwysbach (LL28)
- Area hub
- Conwy
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Eglwysbach
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Same prices wherever you are
- Fixed prices from your pictures
- Nothing taken out or refitted
- Dust sheets down, tidy finish
See our pricing and resurfacing vs replacement cost guide.
Do you need bath repair in Eglwysbach?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
People normally call us after spotting one of these:
- Chips under the taps
- A chipped rim or side
- Deep scratches in acrylic
- Rust by the waste and overflow
Before you book anyone
- A fixed price, and whether VAT is included
- Aftercare advice
- How changes to the job are handled
- Whether the colour is mixed to match
Towns and villages near Eglwysbach
More services for Eglwysbach
Eglwysbach and the surrounding area
Eglwysbach is about 6 miles south-west of Bae Colwyn, in Conwy. Jobs in Eglwysbach are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Eglwysbach is one of 75 towns and villages in Conwy where we work. Our jobs stretch from Eglwysbach to Liverpool (38 miles away).
Our repair technicians cover all of the LL28 postcode area and the streets around it. Jobs here include addresses on Heol Martin, Heol Ffynnon Asa and Heol Carrog and the roads around them. Nearby, we also work in Graig (1 mile north), Pentrefelin (3 miles north), Llansanffraid Glan Conwy (3 miles north), Bryn-rhys (4 miles north) and Bryn-y-maen (4 miles north-east). We also work in nearby towns such as Bae Colwyn (6 miles north-east), Llandudno (7 miles north), Old Colwyn (6 miles north-east), Colwyn Bay (6 miles north-east), Abergele (10 miles north-east) and Colwyn Bay (5 miles north-east).
Around Eglwysbach
We visit homes around Bee Inn and St Martin's Church and the streets around them. The closest station to Eglwysbach is Tal-Y-Cafn station, about 1.2 miles north-west of the centre. A little further out are Conwy Hospital (5.1 miles north-west) and Pen-y-Castell (2.6 miles south). Open spaces near Eglwysbach include Conwy RSPB reserve and Llyn Syberi.
Keeping it looking good
So the finish stays in good condition for years:
- Keep metal cans and razors off the surface
- Cover the bath during DIY or decorating
- Don’t leave a fresh chip for long
- Give the bath a quick rinse after use
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Eglwysbach: your questions answered
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
About our accreditations · Every repair comes with a one-year guarantee.
