Staffordshire · England
Bath Repair for Elford Heath homes
Bath repair across Elford Heath and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- A failed DIY repair that is discoloured or lifting

Aftercare tips
How the surface is treated afterwards matters:
- Keep metal cans and razors off the surface
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave a fresh chip for long
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
How we handle bath repair in Elford Heath
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with chips on the rim or sides and holes from dropped items, we can typically put it right.
Your repair is guaranteed for a year, as with every job we do.

- Location
- Elford Heath (ST21)
- Area hub
- Staffordshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Elford Heath
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Elford Heath. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Colour-matched on site
- Same prices wherever you are
- A year’s guarantee on all work
- Fixed prices from your photos
Read our full price list or bath cost comparison.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Prices and what affects them
Repairs from £95. There is no charge for travel to Elford Heath. The price depends on:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The material and finish
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- The postcode, so we can plan the visit
If you’re in Elford Heath and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Where we work around Elford Heath
Elford Heath is about 6 miles south-west of Stone, in Staffordshire. Our technicians come to homes and businesses in Elford Heath and the surrounding area, so there’s no workshop to go to. Elford Heath is one of 512 places in Staffordshire where we work. Our nearest city page is Birmingham, about 31 miles away.
All of ST21 is covered. Neighbouring places we cover include Eccleshall (1 mile east), Wootton (1 mile south), Copmere End (1 mile south-west), Garmelow (1 mile south-west) and Whitley Heath (2 miles south). Larger places within reach include Stafford (7 miles south-east), Newcastle-under-Lyme (11 miles north), Cannock (15 miles south-east), Longton (11 miles north-east), Rugeley (15 miles south-east) and Stone (6 miles north-east).
Around Elford Heath
In Elford Heath, that means homes near The Eagle Inn, Bishop Lonsdale Church of England Primary Academy and Holy Trinity Church, among other places. Nearby you will also find Eccleshall Castle (0.6 miles north-east). The countryside around Elford Heath includes Cop Mere and Jackon's Coppice and Marsh.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Landlords, agents and businesses in Elford Heath
We work for landlords, letting agents and housing providers in Elford Heath as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
FAQs for Elford Heath
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is a holed acrylic bath repairable?
Typically. Send us a photo of the hole and one from under the bath if you can.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
The process
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. You can expect it to take a few hours, and we will keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Nearby places to Elford Heath
More services for Elford Heath
About our accreditations · Every repair comes with a one-year guarantee.

