Kent · England
Bath chip & crack repair in Elham, Kent
We travel to Elham for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Holes from dropped items
Prices and what affects them
Prices start from £95. You will know the full cost before booking. We look at:
- What kind of damage it is
- What the surface is made of
- Previous DIY repairs that have to come out
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Upload photos of the damage and one of the whole item, and tell us you are in Elham, and we’ll reply with a fixed price.
Bath repair at your home in Elham
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. We’re often asked to fix chips caused by builders and scuffs and scratches in the surface, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
Every repair is covered by our one-year guarantee, wherever you are in Kent.
- Location
- Elham (CT4)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Do you need bath repair in Elham?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Look out for any of the following:
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
- A chipped rim or side
- Impact holes in acrylic
Questions to ask before booking
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- Whether the colour is mixed to match
- How the room is protected while they work
When we would advise against a repair
We will not take on work that will not last, so here’s what a repair can’t put right:
- Wear across the entire surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Send us pictures and we will tell you honestly.
Materials we work on in Elham
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Elham customers choose us
- Fixed prices from your pictures
- Colour-matched on site
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and resurfacing vs replacement cost guide.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Store metal items away from the bath
- Put a towel in the bath if you’re working above it
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse it down after each bath
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know which floor the room is on
- Open a window if you can
- Have somewhere for us to park nearby if possible
Get a quote
If you’re in Elham and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Elham and nearby
Elham is about 5 miles north-west of Folkestone, in Kent. Whether you are in the middle of Elham or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 922 towns and villages across Kent. Our nearest city page is London, about 57 miles away.
We work across the CT4 postcode area and the streets around it. Local streets include High Street, Pound Lane and Vicarage Lane. If you’re just outside Elham, we cover Swingfield Minnis (2 miles east), Densole (3 miles south-east), Selsted (3 miles east), Breach (3 miles north-east) and Lodge Lees (3 miles north-east). Within a short drive, we also cover Ashford (11 miles west), Canterbury (9 miles north), Dover (8 miles east), Folkestone (5 miles south-east), Whitstable (14 miles north) and Deal (13 miles east).
Around Elham
Around Elham, we work in homes near Elham Church of England Primary School, Church of St Mary the Virgin and The King's Arms, among other places. For rail, the closest station is Sandling station, roughly 4.7 miles south-west. A little further out are Royal Victoria Hospital (5.3 miles south-east) and Elham Valley Countryside Centre And Railway Museum (3.7 miles south). Green spaces nearby include Cheriton Hill.
FAQs for Elham
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Are there extra charges for Elham?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Nearby places to Elham
More services for Elham
About our accreditations · Every repair comes with a one-year guarantee.
