Gloucestershire · England
Bath Repair for Elmore homes
Damaged bath in Elmore? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- A hole punched through by something heavy
How to look after the repair
Simple care helps the repair last. We recommend:
- Check that an acrylic bath does not move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Bath repair in Elmore without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you’re dealing with damage beneath the taps and holes from dropped items, we can generally put it right, on roll-top & freestanding, cast iron enamel and whirlpool & spa baths alike.
Every repair comes with our one-year guarantee.
- Where
- Elmore (GL2)
- Region
- Gloucestershire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Other services in Elmore
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Common questions in Elmore
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is a holed acrylic bath repairable?
Usually. Send us a picture of the hole and one from under the bath if you can.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Are there extra charges for Elmore?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
What areas do you cover?
We cover the entire UK, including Elmore and the rest of Gloucestershire. Send your postcode with your pictures and we will offer you dates.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- We come to you, anywhere in the UK
- A fixed quote before booking
- Same prices wherever you are
- Most jobs done in one visit
See our full price list or guide to resurfacing and replacement costs.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Our work in Elmore
Elmore is about 1 mile north-west of Quedgeley, in Gloucestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Elmore is one of 470 places in Gloucestershire we cover. We work right across the region, from Elmore to Birmingham (47 miles away).
We cover every part of the GL2 postcode area and the streets around it. Other places close to Elmore include Calcott's Green (1 mile north-west), Minsterworth (1 mile north), Oakle Street (2 miles north-west), Churcham (3 miles north-west) and Chaxhill (3 miles west). We also work in nearby towns such as Cheltenham (10 miles north-east), Gloucester (3 miles east), Stroud (7 miles south-east), Tewkesbury (13 miles north-east), St Paul's (11 miles north-east) and Lansdown (11 miles north-east).
Near you in Elmore
Around Elmore, we work in homes near Severn Vale School and Meadowside Primary School, among other places. Elmore’s nearest station is Gloucester station, about 3.5 miles north-east of the centre. Nearby you’ll also find Westgate Galleria (3.2 miles north-east) and Gloucester Waterways Museum (2.9 miles north-east). For a walk, there’s Robinswood Hill and Highnam Woods.
When to call us in Elmore
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
People usually call us when they notice one of these:
- Holes from dropped items
- Rust by the waste and overflow
- A chipped rim or side
- A chip where the taps sit
Before you book anyone
- What preparation is included
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether there are any call-out or travel charges
When we’d advise against a repair
We will not take on work that will not last, so here’s what a repair cannot put right:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Elmore
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
What happens on the day
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a few hours, depending on the damage. Before leaving, we tell you how long to leave it and how to care for it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
