Suffolk · England
Bath chip & crack repair in Erwarton, Suffolk
We travel to Erwarton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- A chip where the taps sit
Bath repair in Erwarton, done in place
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We’re frequently asked to fix a failed DIY repair that’s discoloured or lifting and chips along the edge of the bath, on pressed steel enamel, cast iron enamel and acrylic.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Erwarton (IP9)
- Area hub
- Suffolk
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
We work for landlords, letting agents and housing providers in Erwarton as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Erwarton and the surrounding area
Erwarton is about 3 miles north-west of Harwich, in Suffolk. Our repair technicians come to customers in Erwarton and the surrounding area, so you do not need to take anything anywhere. We cover 731 places across Suffolk, from the larger towns to small villages. We work right across the region, from Erwarton to London (65 miles away).
All of IP9 is covered. Streets in the area include The Street and Ness Road, all of which we cover. We also travel to Shop Corner (1 mile west), Shotley (1 mile east), Church End (1 mile north-east), Shotley Common (1 mile north) and Shotley Gate (2 miles east). Larger places within reach include Ipswich (7 miles north-west), Felixstowe (5 miles east), Kesgrave (7 miles north), Woodbridge (10 miles north), Hadleigh (13 miles north-west) and Stoke (6 miles north-west).
Around Erwarton
In Erwarton, that means homes near Queens Head pub, Church of St Mary and Shotley Community Primary School. The nearest railway station is Harwich International station, about 1.8 miles south-east. Other landmarks nearby include Landguard Fort (4.4 miles south-east) and Felixstowe Community Hospital (5.4 miles east). Open spaces near Erwarton include Alton Water and Copperas Wood.
Repair or replace in Erwarton?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in one visit. Prices start from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Erwarton customers choose us
- One price list for the whole UK
- No need to remove anything
- A year’s guarantee on all work
- Colour mixed on the day to match
Take a look at our prices page and bath cost comparison.
Erwarton: your questions answered
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
What areas do you cover?
Across the UK. Prices do not change with location.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
How long does the repair take to cure?
Usually the following day. We will tell you the exact curing time when we finish.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
- Put a towel in the bath if you are working above it
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Common problems we fix in Erwarton
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- Holes from dropped items
- Chips caused by builders
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
What your quote should include
- Whether a trained technician does the job
- What prep work is covered
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
How to prepare
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
When a repair is not the answer
A repair isn’t always the answer, and we would rather say so up front. We can’t fix:
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Other services in Erwarton
About our accreditations · Every repair comes with a one-year guarantee.
