Suffolk · England
Bath Repair for Shop Corner homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Shop Corner. Free, fixed quotes from your photos.
- Repairs from £95
- Snagging damage from a refit
- Deep scratches in acrylic
How we handle bath repair in Shop Corner
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Our repair technicians work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are chips along the edge of the bath and snagging damage from a refit.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Location
- Shop Corner (IP9)
- Area hub
- Suffolk
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
The process
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Common problems we fix in Shop Corner
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted any of these:
- Rust spots around the plughole
- Impact holes in acrylic
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
Before booking anyone
- What prep work is covered
- Who will actually do the work
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
Repairing versus replacing in Shop Corner
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Why Shop Corner customers choose us
- Typically one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Nothing taken out or refitted
Take a look at our full price list or guide to resurfacing and replacement costs.
Also near Shop Corner
Also in Shop Corner
What affects the price in Shop Corner
Prices start from £95. We don’t charge extra for travel to Shop Corner. The price comes down to:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Shop Corner and nearby
Shop Corner is about 3 miles north-west of Harwich, in Suffolk. Whether you’re in the middle of Shop Corner or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 731 towns and villages in Suffolk. You can also see our page for London, about 65 miles away.
Jobs in IP9 work the same way as everywhere else we cover. If you’re just outside Shop Corner, we cover Erwarton (1 mile east), Shotley (2 miles east), Shotley Common (2 miles north-east), Church End (2 miles north-east) and Chelmondiston (2 miles north). We also work in nearby towns such as Ipswich (7 miles north-west), Felixstowe (5 miles east), Kesgrave (7 miles north), Woodbridge (10 miles north-east), Hadleigh (12 miles north-west) and Stoke (6 miles north-west).
Near you in Shop Corner
Around Shop Corner, we work in homes near Queens Head pub and Church of St Mary and the streets around them. Shop Corner’s nearest station is Harwich International station, roughly 2.1 miles south-east of the centre. A little further out are Felixstowe Community Hospital (6 miles east) and Landguard Fort (4.9 miles east). Open spaces near Shop Corner include Alton Water and Copperas Wood.
How to look after the repair
So the finish stays in good condition for years:
- Ensure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Have new chips seen to early
- Get a dripping tap fixed promptly
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
FAQs for Shop Corner
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you work in Shop Corner?
Yes. We work across the UK and travel to Shop Corner and the rest of Suffolk. Send pictures and we’ll quote, or call 0345 017 0787.
When a repair is not the answer
It helps to know what we cannot do:
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Shop Corner
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
