Darlington · England
Bath Repair for Eryholme homes
Bath repair in Eryholme without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Snagging damage from a refit
- A failed DIY repair that’s discoloured or lifting
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- Work done at your home or business
- One price list for the whole UK
- Straight answers about what a repair can do
- Colour-matched on site
Take a look at our full price list or bath cost comparison.
About our bath repair in Eryholme
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Common call-outs are for a chip where the taps sit and chips caused by builders, in pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
Big or small, you get the same one-year guarantee.
- Location
- Eryholme (DL2)
- Area hub
- Darlington
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Eryholme
Eryholme is about 4 miles south-east of Darlington, in Darlington. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover 53 places in Darlington, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 36 miles away.
All of DL2 is covered, from the main roads to the quietest streets. We also cover the places around Eryholme: Hurworth-on-Tees (1 mile north-west), Dalton-on-Tees (2 miles west), Hurworth Place (2 miles west), Croft-on-Tees (2 miles west) and Dalton Gates (3 miles south-west). Further out, we also cover Darlington (4 miles north-west), Harrowgate Hill (5 miles north), West Park (6 miles north-west), Eastbourne (3 miles north), Cockerton (5 miles north-west) and Rise Carr (5 miles north-west).
Local landmarks in Eryholme
Typical jobs here are in homes near Hurworth School and Church of St Mary the Virgin and the streets around them. The closest station to Eryholme is Dinsdale station, about 3.2 miles north-east. Other landmarks nearby include Tubwell Row Museum (4 miles north-west) and South Cowton Castle (4.4 miles south-west).
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. The room is left tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Do not leave a fresh chip for long
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
When we’d advise against a repair
A repair is not right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Prices and what affects them
Prices start from £95. There’s no charge for travel to Eryholme. The price comes down to:
- How many areas need work
- The material and finish
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- Where you are, by postcode
- Natural light rather than flash
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
FAQs for Eryholme
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Common problems we fix in Eryholme
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Look out for these signs:
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- A chip where the taps sit
Questions to ask before booking
- What happens if they find more damage
- What aftercare is recommended
- Whether they match the colour on site
- How long it needs to cure
Places near Eryholme
More services for Eryholme
About our accreditations · Every repair comes with a one-year guarantee.
