Darlington · England
Bath chip & crack repair in Dalton-on-Tees, Darlington
We travel to Dalton-on-Tees for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Dalton-on-Tees
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, usually in a single visit. Whether it’s chips caused by builders and hairline or through cracks in acrylic, we can help.
All of our repairs are guaranteed for twelve months in Dalton-on-Tees and everywhere else. If something goes wrong with the work, we come back.
- Where
- Dalton-on-Tees (DL2)
- Region
- Darlington
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Ensure the area is dry
Get a quote
Send us pictures of the damage and one of the entire item, and tell us you’re in Dalton-on-Tees, and we’ll come back with a fixed quote.
Related advice
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- The material
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- Whether it’s been repaired or coated before
- A photo taken from further back
- The postcode, so we can plan the visit
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Nearby places to Dalton-on-Tees
What else we do in Dalton-on-Tees
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common problems we fix in Dalton-on-Tees
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things customers generally mention when they call are:
- Chips under the taps
- A chipped rim or side
- A kit repair that didn’t last
- A hole punched through by something heavy
What to look for in a quote
- Aftercare advice
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- Who turns up on the day
Your questions about bath repair in Dalton-on-Tees
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Which areas do you work in?
We work UK-wide, and that includes Dalton-on-Tees. Our prices are the same everywhere.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How long does the repair take to cure?
Normally the next day. We’ll tell you the exact curing time when we finish.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
About Dalton-on-Tees
Dalton-on-Tees is about 5 miles south of Darlington, in Darlington. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We work in 53 places in Darlington, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 36 miles away.
Our visits in DL2 work the same way as everywhere else we cover. That includes homes on Orchard Close and Northallerton Road and the roads around them. We also travel to Hurworth Place (1 mile north), Croft-on-Tees (1 mile north-west), Hurworth-on-Tees (1 mile north), Eryholme (2 miles east) and Dalton Gates (2 miles south). Within a short drive, we also cover Darlington (5 miles north), Harrowgate Hill (5 miles north), West Park (6 miles north), Eastbourne (4 miles north), Cockerton (5 miles north) and Rise Carr (5 miles north).
Local landmarks in Dalton-on-Tees
Around Dalton-on-Tees, we work in homes near Hurworth House School, Hurworth School and Chequers Inn, among other places. The closest station to Dalton-on-Tees is Darlington station, roughly 3.7 miles north of the centre. Further afield, we also cover the area around Darlington Memorial Hospital (4.4 miles north) and South Cowton Castle (3.5 miles south).
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Repair or replace in Dalton-on-Tees?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colour-matched on site
- Everything repaired in place
- Same prices wherever you are
- We will tell you if it’s not worth repairing
Read our pricing or bath cost comparison.
Looking after it afterwards
Nothing complicated is needed:
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
