North Yorkshire · England
Bath Repair for Dalton Gates homes
Problem with your bath in Dalton Gates? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Snagging damage from a refit
About our bath repair in Dalton Gates
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Typical jobs include rusty patches near the plughole and a kit repair that didn’t last, on acrylic, roll-top & freestanding and pressed steel enamel.
You get a one-year guarantee, the same in Dalton Gates as everywhere else we work.
- Area
- Dalton Gates (DL7, DL2)
- County
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take two to three hours for most chips, including clearing up.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say immediately whether it can be repaired.
Read more
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What bath repair costs
Prices start from £95. There’s no charge for travel to Dalton Gates. The price depends on:
- What kind of damage it is
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How much damage there is
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
You can take the photos on your phone. Make sure they show:
- What it’s made of, if you know
- Natural light rather than flash
- Your postcode, so we can check dates
- One picture of the whole bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Places near Dalton Gates
Other services in Dalton Gates
Do you need bath repair in Dalton Gates?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Common reasons people in Dalton Gates contact us are:
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Chips on the rim or sides
- A failed DIY repair that is discoloured or lifting
Before you book anyone
- What happens if the damage is worse than the photos show
- What the guarantee covers, and for how long
- Who will actually do the work
- How to care for the finish
About Dalton Gates
Dalton Gates is about 6 miles south of Darlington, in North Yorkshire. Wherever you are in the DL7 postcode area, we come to you. Dalton Gates is one of 626 places in North Yorkshire where we work. Our jobs stretch from Dalton Gates to Newcastle upon Tyne (about 38 miles away).
We work across DL7 and DL2. If you’re just outside Dalton Gates, we cover North Cowton (1 mile south-west), East Cowton (2 miles south-east), Dalton-on-Tees (2 miles north), Eryholme (3 miles north-east) and Hurworth Place (3 miles north). Within a short drive, we also cover Catterick Garrison (8 miles south-west), Northallerton (8 miles south-east), Richmond (8 miles west), Colburn (7 miles south-west), Stokesley (15 miles east) and Bedale (11 miles south).
Local landmarks in Dalton Gates
We visit homes around North and South Cowton Community Primary School. Further afield, we also cover the area around South Cowton Castle (1.6 miles south).
Landlord and trade work in Dalton Gates
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Dalton Gates, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Dalton Gates
- Nothing taken out or refitted
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- No extra charge for your area
Read our pricing or bath cost comparison.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Avoid scourers, wire wool and gritty cream cleaners
- Get a dripping tap fixed promptly
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Questions from Dalton Gates
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you come to Dalton Gates?
Yes. We work across the UK and come to Dalton Gates. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across North Yorkshire.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
About our accreditations · Every repair comes with a one-year guarantee.
