Somerset · England
Bath Repair for Escott homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Escott, carried out at your home and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- The material
- The type of damage
- How hard the colour is to match
- Previous DIY repairs that have to come out
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
Email us a picture of the damage and one of the entire item, and tell us you’re in Escott, and we will reply with a fixed quote.
Bath repair in Escott without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, pressed steel enamel and acrylic, and common reasons people contact us are scuffs and scratches in the surface and chips under the taps.
All of our repairs are guaranteed for twelve months in Escott and everywhere else. We return to put right any problem with the work.
- Location
- Escott (TA4)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we will say what we think.
Materials we work on in Escott
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Do you need bath repair in Escott?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Look out for these signs:
- Chips caused by builders
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
Before booking anyone
- What the guarantee covers, and for how long
- Whether they match the colour on site
- How the room is protected while they work
- What prep work is covered
What we do, step by step
We agree an arrival time beforehand, so you are not left guessing. On site, it takes two to three hours for most chips for most jobs. We leave the room clean and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Open a window if you can
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Related advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Towns and villages near Escott
Also in Escott
Covering Escott
Escott is about 9 miles south-east of Minehead, in Somerset. Whether you’re in the middle of Escott or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Escott is one of 640 places in Somerset where we work.
All of TA4 is covered. If you are just outside Escott, we cover Monksilver (1 mile west), Sampford Brett (1 mile north), Nettlecombe (2 miles west), Williton (2 miles north) and Doniford (3 miles north). Larger places within reach include Taunton (12 miles south-east), Bridgwater (13 miles east), Minehead (9 miles north-west), Burnham-on-Sea (15 miles north-east), Wellington (11 miles south) and Sydenham (14 miles east).
Local landmarks in Escott
Around Escott, we work in homes near The White Horse Inn, Church of St Mary and Stogumber CofE Primary School. Well-known places in the area include Bakelite Museum (2 miles north-west). For a walk, there is Wills Neck.
Common questions in Escott
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you cover the whole of Somerset?
We cover the entire UK, including Escott and the rest of Somerset. Just include your postcode and we will offer you dates.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Landlords, agents and businesses in Escott
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
- Put a towel in the bath if you are working above it
- Keep abrasive pads and gritty cleaners away from the bath
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
