Somerset · England
Bath Re-enamelling for Escott homes
We travel to Escott for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a full day. Before leaving, we tell you when it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Tell us if there are stairs or a lift
- Open a window if you can
- Move bottles, mats and clutter away from the area
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Bath re-enamelling at your home in Escott
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Whether it’s wear marks under the taps and an old resurfacing that’s failing, we can help, on Victorian roll-tops, acrylic baths and cast iron baths alike.
All our work comes with a one-year guarantee.
- Area
- Escott (TA4)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
About Escott
Escott is about 9 miles south-east of Minehead, in Somerset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Escott is one of 640 places in Somerset where we work.
Our repair technicians cover all of TA4. We also cover the places around Escott: Monksilver (1 mile west), Sampford Brett (1 mile north), Nettlecombe (2 miles west), Williton (2 miles north) and Doniford (3 miles north). We also work in nearby towns such as Taunton (12 miles south-east), Bridgwater (13 miles east), Minehead (9 miles north-west), Burnham-on-Sea (15 miles north-east), Wellington (11 miles south) and Sydenham (14 miles east).
What’s near Escott
We visit homes around The White Horse Inn, Church of St Mary and Stogumber CofE Primary School and the streets around them. Other landmarks nearby include Bakelite Museum (2 miles north-west). The countryside around Escott includes Wills Neck.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- Every repair guaranteed for a year
- Nothing taken out or refitted
Take a look at our full price list and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Escott. The price reflects:
- The size and number of damaged areas
- The material
- What kind of damage it is
- Whether we combine several jobs
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- The material, if you know it
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
What we can’t put right
It helps to know what we can’t do too:
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
FAQs for Escott
Do you cover the whole of Somerset?
Across the UK. Prices don’t change with location.
How do I get a price for bath re-enamelling in Escott?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you cover Escott?
Yes, we do. We send a technician to Escott for every job, and the price is the same as everywhere else.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Common problems we fix in Escott
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Send us a photo if you notice any of these:
- Wear marks under the taps
- Stains that will not shift
- Chips and rust in more than one place
- A coating lifting around the plughole
Before you book anyone
- Whether the price covers travel
- Who will actually do the work
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
Towns and villages near Escott
What else we do in Escott
About our accreditations · Every repair comes with a one-year guarantee.
