Bridgend · Wales
Bath Repair for Ewenny homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Ewenny, carried out at your home and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips caused by builders
What we are called out for in Ewenny
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for these signs:
- Chips on the rim or sides
- A cracked acrylic bath
- A hole punched through by something heavy
- Rusty patches near the plughole
What your quote should include
- The length of the guarantee and what it covers
- How your room will be protected
- Whether cleaning and preparation are in the price
- When it can be used again
How we handle bath repair in Ewenny
Most of our bath repairs take a few hours, and you can normally bathe again the day after. There’s no need to book a plumber or tiler, because the bath does not move. Common call-outs are for a chip where the taps sit and chips on the rim or sides, in whirlpool & spa baths, acrylic and roll-top & freestanding.
You get a one-year guarantee, the same in Ewenny as everywhere else we work.
- Area
- Ewenny (CF35, CF31)
- County
- Bridgend
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Simple care helps the repair last. Our advice:
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Ewenny as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Honest limits
Some jobs aren’t right for a repair, for example:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Nearby places to Ewenny
What else we do in Ewenny
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Repair or replace: which is better?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- One visit for most repairs
- A fixed quote before booking
- Everything repaired in place
- Colour-matched on site
Read our prices page and resurfacing vs replacement cost guide.
Ewenny questions
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Is a cracked acrylic bath repairable?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your CF35 postcode.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Ewenny and the surrounding area
Ewenny is about 2 miles south of Newcastle Higher, in Bridgend. Wherever you are in the CF35 postcode area, a technician comes to you. Our technicians cover all 91 towns and villages in Bridgend, from the larger towns to small villages.
All of CF35 and CF31 is covered. From Wick Road, Rose Lane and Abbey Road or anywhere nearby, we can come to you. Close by, we cover Ewenni (1 mile west), Corntwn (1 mile east), Hernston (1 mile north-east), Whiterock (1 mile north) and Newcastle (1 mile north). Within a short drive, we also cover Maesteg (9 miles north), Porthcawl (5 miles west), Ynysawdre (5 miles north), Pencoed (4 miles north-east), Coity Higher (3 miles north) and St Bride's Minor (4 miles north).
Landmarks near Ewenny
Typical jobs here are in homes near Church of St Michael and Brynteg Comprehensive School, among other places. The closest station to Ewenny is Bridgend station, roughly 1.7 miles north. Further afield, we also cover the area around Princess of Wales Hospital (2.4 miles north) and Oldcastle Bridgend (1.4 miles north). Not far away are Old Castle Down and Pwll y Waun.
- Other local spots include Llandow/Ewenny (2.4 miles south-east)
About our accreditations · Every repair comes with a one-year guarantee.
