Hampshire · England
Bath re-enamelling & resurfacing in Faberstown, Hampshire
Damaged bath in Faberstown? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that is seen better days
Bath re-enamelling in Faberstown, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We regularly repair acrylic baths, Victorian roll-tops and pressed steel baths, and people most often call us about a dull, rough surface that won’t come clean and thin, worn enamel in places.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Faberstown (SP11)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
More services for Faberstown
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
For anyone letting property in or around Faberstown, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Do you need bath re-enamelling in Faberstown?
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Common reasons people in Faberstown contact us include:
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
What to look for in a quote
- How to look after the finish
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
Faberstown questions
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Which areas do you work in?
Everywhere in the UK, Faberstown included. There’s no extra charge for travel.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Covering Faberstown
Faberstown is about 5 miles north-west of Andover, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 683 towns and villages across Hampshire. You can also see our page for London, about 67 miles away.
Our visits in SP11 are booked in the same way as anywhere else. We regularly work on streets such as Andover Road and Shoddesden Lane and the roads around them. Nearby, we also work in Redenham (1 mile east), Appleshaw (1 mile east), Fyfield (2 miles south), Chute Forest (2 miles north-east) and Clanville (2 miles east). Within a short drive, we also cover Andover (5 miles south-east), Tidworth (3 miles west), Whitchurch (11 miles east), East Anton (6 miles east), Overton (14 miles east) and Picket Piece (7 miles east).
Landmarks near Faberstown
Typical jobs here are in homes near Church of St Peter in the Wood. The nearest railway station is Andover station, about 4.7 miles south-east. Nearby you’ll also find Andover War Memorial Hospital (4.5 miles south-east) and Ludgershall Castle (1.8 miles north-west). Open spaces near Faberstown include Quarley Hill and Anton Lakes.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether we combine several jobs
- Where the damage is and how we get to it
- The material
- Previous DIY repairs that have to come out
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- One picture of the whole bath
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
Send us a photo of the damage and one of the whole item, and tell us you’re in Faberstown, and we’ll reply with a fixed quote.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Aftercare tips
Simple care helps the repair last. Our advice:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
The process
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow most of the day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
