Greater London · England

Bath chip & crack repair in Farnborough, Greater London

Fixed-price bath repair in Farnborough and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Farnborough

Bath repair in Farnborough without replacing anything

We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include a chip where the taps sit and an old repair that has yellowed or come loose, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.

Every repair is covered by a one-year guarantee.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Farnborough (BR6)
County
Greater London
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What your bath is made of matters

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

How we price bath repair

Repairs from £95. We price every job individually. The main factors are:

  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • How many areas need work

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

Photographing the damage takes a minute. Try to send:

  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before
  • Any details about the material
  • A clear, close picture of the problem area

Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Farnborough, and we will reply with a fixed price.

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, typically by the following day, the bath is ready to use.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Tell us about parking, stairs or access
  • Point us to the nearest place to park

Ask for a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Send photos for a quote

Related advice

Farnborough: your questions answered

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

How long before I can use the bath?

Normally by the following day, though it depends on what we’ve done.

Do you charge for travel?

There is no separate call-out charge. The fixed quote covers the visit and the work.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Something went through my bath. Can it be fixed?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Rinse the bath after use, especially in hard water areas
  • Ensure an acrylic bath is firm underfoot
  • Do not leave razors or cans standing in the bath
  • Use a soft cloth and washing-up liquid for everyday cleaning

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Repairing versus replacing in Farnborough

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Most jobs done in one visit
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work
  • Colour-matched on site

See our pricing and resurfacing vs replacement cost guide.

Our work in Farnborough

Farnborough is about 2 miles south-west of Orpington, in Greater London. We visit customers in Farnborough, so nothing has to leave your home. Farnborough is one of 764 places in Greater London we cover. We work right across the region, from Farnborough to London (about 12 miles away).

All of BR6 is within our area, from the main roads to the quietest streets. From Tye Lane, Peel Road and Pitt Road or a nearby road, we can come to you. If you’re just outside Farnborough, we cover Green Street Green (1 mile south-east), Locksbottom (1 mile north-west), Crofton (1 mile north), Farthing Street (1 mile south-west) and Downe (2 miles south-west). Further out, we also cover London (12 miles north-west), City of Westminster (15 miles north-west), Marylebone (15 miles north-west), Kensington (15 miles north-west), St Pancras (14 miles north-west) and Shoreditch (13 miles north-west).

Near you in Farnborough

We visit homes around South Park, Farnborough Primary School and The Buff pub and the streets around them. Nearby too are Church of St Giles the Abbot (within half a mile south-west) and Newstead Wood School (0.6 miles north). The closest station to Farnborough is Orpington station, about 1.2 miles north-east. Other landmarks nearby include Orpington Hospital (0.9 miles east) and Crofton Roman Villa (1.1 miles north-east). Green spaces nearby include Downe Bank Nature Reserve and Summer Hill.

Map of Farnborough © OpenStreetMap contributors

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A steel bath rusted through
  • Cracks in acrylic we can’t reach from underneath

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.