Greater London · England

Bath Repair in Locksbottom

Chip and crack repairs to enamel, acrylic and cast iron baths in Locksbottom, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Snagging damage from a refit
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Locksbottom?

Bath repair in Locksbottom without replacing anything

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Whether it’s scuffs and scratches in the surface and chips along the edge of the bath, we can help, whatever the material.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Locksbottom (BR6, BR2, BR5)
Area hub
Greater London
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

Repair or replace in Locksbottom?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

What you get with us

  • Straight answers about what a repair can do
  • Colours mixed by hand to suit your surface
  • Repair technicians who travel to you, UK-wide
  • A fixed quote before you book

Take a look at our pricing or guide to resurfacing and replacement costs.

What affects the price in Locksbottom

Repairs from £95. You won’t pay by the hour. The price is based on:

  • The type of damage
  • The colour and finish to match
  • What the surface is made of
  • Any earlier repairs that need removing first

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus
  • What it’s made of, if you know

For a price in Locksbottom, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Aftercare tips

To keep it looking its best for years:

  • Put a towel in the bath if you are working above it
  • Give the bath a quick rinse after use
  • Fix dripping taps early to stop staining and limescale
  • Don’t scrub with anything abrasive

There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.

What a repair can’t fix

It helps to know what we can’t do too:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling
  • A steel bath rusted through

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

Locksbottom and the surrounding area

Locksbottom is about 2 miles south-west of Orpington, in Greater London. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Locksbottom is one of 764 places in Greater London we cover. You can also see our page for London, about 11 miles away.

We cover every part of the BR6, BR2 and BR5 postcode area. From Mada Road, Winton Road and Park Avenue or a nearby road, we can come to you. Other places close to Locksbottom include Crofton (1 mile east), Farnborough (1 mile south-east), Petts Wood (1 mile north-east), Bromley Common (1 mile north-west) and Keston (1 mile south-west). Further out, we also cover London (11 miles north-west), City of Westminster (14 miles north-west), Marylebone (14 miles north-west), Kensington (14 miles north-west), St Pancras (13 miles north-west) and Shoreditch (12 miles north-west).

Around Locksbottom

Typical jobs here are in homes near Darrick Wood School, St Paul and South Park and the streets around them. The closest station to Locksbottom is Orpington station, roughly 1.2 miles east of the centre. A little further out are The Mall (2.9 miles north-west) and Princess Royal University Hospital (0.5 miles south-west). Open spaces near Locksbottom include Summer Hill and Downe Bank Nature Reserve.

  • Other local spots include Municipal Borough of Bromley (2.8 miles north-west)
Map of Locksbottom © OpenStreetMap contributors

Common questions in Locksbottom

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we will plan for it.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Greater London.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Can you price it without visiting?

Typically, yes. Clear photos let us give you a fixed price without visiting.

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What we do, step by step

Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a morning or an afternoon. We leave the room clean.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Ensure the area is dry
  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a free quote

Advice

Signs you need bath repair in Locksbottom

A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.

Most people get in touch when they notice something like this:

  • A hole punched through by something heavy
  • Cracks in an acrylic bath
  • Chips caused by builders
  • A chipped rim or side

Questions to ask before booking

  • How your room will be protected
  • The length of the guarantee and what it covers
  • Aftercare advice
  • Who will actually do the work

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.