Staffordshire · England
Bath chip & crack repair in Fauld, Staffordshire
Bath repair in Fauld without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Chips caused by builders
- Scuffs and scratches in the surface
How we handle bath repair in Fauld
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. We work on pressed steel enamel, whirlpool & spa baths and acrylic, and common reasons people contact us are rust by the waste and overflow and snagging damage from a refit.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Fauld (DE13)
- County
- Staffordshire
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- Doing more than one item at once
- The material and finish
- How easy the damage is to reach
Our prices are the same across the UK, so there is no premium for Fauld. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A wider photo showing the whole bath
- Something in shot to show the size
- A clear, close picture of the problem area
- Any details about the material
If you are in Fauld and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, depending on the damage, including clearing up.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the next day, the bath is ready to use.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Tell us if there are stairs or a lift
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Fauld: your questions answered
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Do you cover Fauld?
Yes, we do. We send a technician to Fauld for every job, with no extra charge for travel.
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Landlord and trade work in Fauld
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Aftercare tips
After the repair has cured, a few habits help it last:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Cover the bath during DIY or decorating
- Rinse the bath after use, especially in hard water areas
- Do not scrub with anything abrasive
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What else we do in Fauld
Fauld and the surrounding area
Fauld is about 5 miles north-west of Burton upon Trent, in Staffordshire. Anywhere in DE13, we come to you. Fauld is one of 512 towns and villages in Staffordshire we cover. We work right across the region, from Fauld to Birmingham (about 28 miles away).
Jobs in DE13 are booked in the same way as anywhere else. Close by, we cover Scropton (1 mile north), Hanbury (1 mile south-west), Woodend (2 miles south-west), Blackbrook (2 miles south) and Foston (2 miles north). Further out, we also cover Burton upon Trent (5 miles south-east), Lichfield (13 miles south), Rugeley (12 miles south-west), Burntwood (15 miles south-west), Cheadle (14 miles north-west) and Uttoxeter (7 miles north-west).
Local landmarks in Fauld
We visit homes around Church of St Paul and the streets around them. The closest station to Fauld is Tutbury & Hatton station, roughly 1.6 miles east. Other landmarks nearby include Tutbury Museum (1.4 miles east) and Tutbury Castle (1.2 miles east).
Do you need bath repair in Fauld?
A cracked acrylic bath normally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
Send us a photo if you notice any of these:
- Holes from dropped items
- Cracks in an acrylic bath
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
What to look for in a quote
- How your room will be protected
- Whether the price covers travel
- What prep work is covered
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
