Wiltshire · England

Bath Repair in Faulston

Bath repair for Faulston, without a refit. Get a fixed price from your photos, then we come to you.

  • Repairs from £95
  • A chip where the taps sit
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Faulston

About our bath repair in Faulston

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Whether it’s damage done while the bathroom was being fitted and hairline or through cracks in acrylic, we can typically put it right, on cast iron enamel, acrylic and roll-top & freestanding alike.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Area
Faulston (SP5)
Area hub
Wiltshire
Warranty
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

The process

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed price

Related advice

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Protect the bath with a towel when doing jobs nearby
  • Check that an acrylic bath does not move when you stand in it
  • Don’t leave razors or cans standing in the bath
  • Use a soft cloth and washing-up liquid for everyday cleaning

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Honest limits

It helps to know what we cannot do too:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Cracks in parts of an acrylic bath we can’t get to from below

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

Prices and what affects them

Prices start from £95. There’s no charge for travel to Faulston. The price comes down to:

  • The material
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed price

It only takes a minute to photograph the damage. Try to send:

  • A wider photo showing the entire bath
  • Any details about the material
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare

Upload a picture of the damage and a wider shot of the whole item, with your SP5 postcode, and we will reply with a fixed quote.

FAQs for Faulston

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Is a holed acrylic bath repairable?

In most cases. Photos of the hole and the underside help us check.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Do you cover the whole of Wiltshire?

Across the UK, and that includes Faulston. Our prices are the same everywhere.

Can you match an avocado or pink bath?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Repair or replace: which is better?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before booking.

Why choose Surface Doctor in Faulston

  • Honest advice, even when it means no job
  • Free fixed quotes from pictures
  • Colour-matched on site
  • Dust sheets down, tidy finish

Read our prices page and resurfacing vs replacement cost guide.

Signs you need bath repair in Faulston

Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.

Most people get in touch when they notice one of these:

  • A hole punched through by something heavy
  • Snagging damage from a refit
  • Scuffs and scratches in the surface
  • An old repair that has yellowed or come loose

Before you book anyone

  • Who turns up on the day
  • How changes to the job are handled
  • The length of the guarantee and what it covers
  • What preparation is included

How to compare quotes

Faulston and nearby

Faulston is about 5 miles south-west of Salisbury, in Wiltshire. Whether you are in the middle of Faulston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages.

We cover every part of the SP5 postcode area. From Harvest Lane, The Styles and The Croft or a nearby road, we can come to you. Other places close to Faulston include Croucheston (1 mile south-west), Broad Chalke (2 miles west), Compton Chamberlayne (4 miles north-west), Bowerchalke (4 miles south-west) and Barford St Martin (4 miles north). Within a short drive, we also cover Salisbury (5 miles north-east), Amesbury (11 miles north-east), Bugmore (5 miles north-east), Milford (6 miles north-east), Old Sarum (7 miles north-east) and Harnham (5 miles east).

What’s near Faulston

In Faulston, that means homes near The Three Horseshoes pub and Church of St John the Baptist, among other places. For rail, the closest station is Salisbury station, roughly 4.9 miles north-east of the centre. Well-known places in the area include Wilton Royal Carpet Factory Museum (3.7 miles north-east) and Harvard Hospital (4.5 miles east). The countryside around Faulston includes Compton Down.

Map of Faulston © OpenStreetMap contributors

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.