Wiltshire · England
Bath Repair for Compton Chamberlayne homes
Local bath repair for Compton Chamberlayne: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Impact holes in acrylic
- Damage beneath the taps
Prices and what affects them
Prices start from £95. You will not pay by the hour. The price depends on:
- How easy the damage is to reach
- How much damage there is
- The colour and finish to match
- The material
A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Something in shot to show the size
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
About our bath repair in Compton Chamberlayne
Most of our bath repairs take a few hours, and the bath is back in use the following day. You will not need a plumber or tiler, because the bath doesn’t move. Whether it’s rusty patches near the plughole and a chip where the taps sit, we can usually put it right, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Compton Chamberlayne (SP3)
- County
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Compton Chamberlayne
Also in Compton Chamberlayne
Common problems we fix in Compton Chamberlayne
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a photo:
- A chipped rim or side
- A hole punched through by something heavy
- A cracked acrylic bath
- Rust spots around the plughole
Comparing quotes
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Who turns up on the day
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Your questions about bath repair in Compton Chamberlayne
What areas do you cover?
The whole UK, including all of Wiltshire. Send your postcode with your photos and we’ll confirm dates.
Can you repair a hole in a bath?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
How long before I can use the bath?
Usually within a day, depending on the repair.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you work in Compton Chamberlayne?
We do. Repair technicians travel to Compton Chamberlayne from across the region, with no extra charge for travel.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How it works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes a few hours, depending on the damage.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know if it has been repaired before
Getting a price
If you are in Compton Chamberlayne and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think before booking.
What we work on
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- We will tell you if it’s not worth repairing
- Fixed prices from your photos
- Colour-matched on site
- Rooms protected and left tidy
See our full price list or guide to resurfacing and replacement costs.
Compton Chamberlayne and nearby
Compton Chamberlayne is about 7 miles west of Salisbury, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 425 places across Wiltshire, from the larger towns to small villages.
Here we cover the SP3 postcode area. If you are just outside Compton Chamberlayne, we cover Baverstock (1 mile north), Dinton (2 miles north-west), Barford St Martin (2 miles north-east), Broad Chalke (3 miles south) and Croucheston (4 miles south-east). We also work in nearby towns such as Salisbury (7 miles east), Warminster (14 miles north-west), Amesbury (11 miles north-east), Bugmore (7 miles east), Milford (8 miles east) and Old Sarum (8 miles east).
Near you in Compton Chamberlayne
Our customers here include homes close to Church of St Michael, among other places. Further afield, we also cover the area around East Castle (4 miles north). Open spaces near Compton Chamberlayne include Baverstock Juniper Bank and Compton Down.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
