West Sussex · England

Bath Repair in Faygate

We travel to Faygate for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • A chip where the taps sit
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Faygate

Bath repair in Faygate, done in place

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the day after. Our technicians work on cast iron enamel, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are scratches you can feel with a fingernail and a kit repair that didn’t last.

Big or small, you get the same one-year guarantee in Faygate and across West Sussex.

Area
Faygate (RH12)
Area hub
West Sussex
Cover
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

How to care for the repair

Much of the damage we repair could have been avoided. These habits help:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave a fresh chip for long
  • Keep metal cans and razors off the surface
  • Check that an acrylic bath doesn’t move when you stand in it

Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

Honest limits

Some jobs aren’t right for a repair, for example:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Cracks in acrylic we cannot reach from underneath

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic

Our work in Faygate

Faygate is about 3 miles north-east of Horsham, in West Sussex. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Faygate is one of 371 places in West Sussex where we work. Our jobs stretch from Faygate to London (about 29 miles away).

Here we cover the RH12 postcode area. We regularly work on streets such as Station Approach, Faygate Lane and Durrants Drive and the roads around them. Neighbouring places we cover include Kilnwood Vale (1 mile east), Colgate (1 mile south-east), Roffey (2 miles south-west), Broadfield (2 miles east) and Mannings Heath (4 miles south). Within a short drive, we also cover Crawley (3 miles east), Horsham (3 miles south-west), Haywards Heath (10 miles south-east), Burgess Hill (11 miles south-east), East Grinstead (11 miles east) and Storrington (15 miles south-west).

Near you in Faygate

Our clients here include homes close to Target Hill Park, St Francis' Church and Holy Trinity CofE Secondary School, among other places. Faygate has its own railway station: Faygate station. Other landmarks nearby include Crawley Hospital (3.2 miles north-east) and County Mall (3.6 miles east). The countryside around Faygate includes Warnham LNR and Tilgate Lake.

Map of Faygate © OpenStreetMap contributors

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and how to care for it.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the next day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access
  • Make sure the area is dry

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

For landlords and businesses

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Should you replace it?

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

What you get with us

  • Nothing taken out or refitted
  • Colour-matched on site
  • We leave the room as we found it
  • Same prices wherever you are

Read our prices page or guide to resurfacing and replacement costs.

Common questions in Faygate

What happens once I’ve sent photos?

We come back with a fixed price. You are under no obligation.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

How soon can you come?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

Can I get a quote without a visit?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

When to call us in Faygate

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

If you can see any of these, send us a photo:

  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
  • Holes from dropped items
  • Scuffs and scratches in the surface

Questions to ask before booking

  • What aftercare is recommended
  • What preparation is included
  • Whether they match the colour on site
  • Who will actually do the work

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.