Staffordshire · England
Bath Repair for Fazeley homes
Local bath repair for Fazeley: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chip where the taps sit
Bath repair in Fazeley, done in place
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Typical jobs include a kit repair that didn’t last and damage beneath the taps, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Fazeley (B78)
- Region
- Staffordshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Looking after it afterwards
To keep it looking its best:
- Do not leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Have new chips seen to early
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Repairing versus replacing in Fazeley
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- One visit for most repairs
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Technicians who travel to you, UK-wide
Read our prices page and bath cost comparison.
Fazeley: your questions answered
What happens next?
We come back with a fixed price. There is no obligation to book.
Do you come to Fazeley?
Yes. We cover the entire UK and come to Fazeley and the rest of Staffordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What bath repair costs
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- The material
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Unusual colours or finishes
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- One sharp close-up of the damage
- Any details about the material
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Landlord and trade work in Fazeley
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Our work in Fazeley
Fazeley is about 1 mile south-west of Tamworth, in Staffordshire. Jobs in Fazeley are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in all 512 towns and villages across Staffordshire. Our jobs stretch from Fazeley to Birmingham (13 miles away).
Our repair technicians cover all of the B78 postcode area and the streets around it. We regularly work on streets such as Somerset Close, Rutland Drive and Devonshire Drive. Fazeley sits on or near the A5 and A453, so getting to you is simple. We also travel to Bitterscote (1 mile north), Mile Oak (1 mile west), Leyfields (2 miles north), The Bodnetts (2 miles north-west) and Coton (2 miles north-west). Within a short drive, we also cover Burton upon Trent (13 miles north), Cannock (14 miles north-west), Lichfield (7 miles north-west), Rugeley (14 miles north-west), Burntwood (10 miles north-west) and Hednesford (14 miles north-west).
Landmarks near Fazeley
Locally, our jobs take us to homes close to Church of St Paul, Tamworth Enterprise College and Millfield Primary School, among other places. For rail, the closest station is Wilnecote station, roughly 1.1 miles south-east of the centre. Further afield, we also cover the area around The Bryans Museum (0.5 miles south-west) and Ankerside Shopping Centre (1.1 miles north-east). For a walk, there is Middleton Lakes RSPB reserve.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Have a window or extractor fan available
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Towns and villages near Fazeley
What else we do in Fazeley
About our accreditations · Every repair comes with a one-year guarantee.
