Staffordshire · England
Bath Repair for Bitterscote homes
Bath repair for Bitterscote, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
About our bath repair in Bitterscote
Most of our bath repairs take a few hours, and the bath is back in use the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. Whether it’s damage done while the bathroom was being fitted and holes from dropped items, we can help, whatever the material.
All our work is covered by a one-year guarantee.
- Area
- Bitterscote (B79, B78, B77)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Also near Bitterscote
Also in Bitterscote
What we are called out for in Bitterscote
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People typically call us after spotting something like this:
- Chips on the rim or sides
- Snagging damage from a refit
- A kit repair that didn’t last
- Deep scratches in acrylic
Questions to ask before booking
- What preparation is included
- How to care for the finish
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Our work in Bitterscote
Bitterscote is about 1 mile west of Tamworth, in Staffordshire. Whether you’re in the middle of Bitterscote or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 512 places in Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 14 miles away.
Postcode districts we cover here: B79, B78 and B77. Local streets include Fazeley Road, Bonehill Road and Sutton Avenue, all of which we cover. Main roads around Bitterscote include the A51 and A453, so getting to you is simple. We also cover the places around Bitterscote: Fazeley (1 mile south), Leyfields (1 mile north), Mile Oak (1 mile south-west), Coton Green (1 mile north) and Coton (1 mile north-west). Within a short drive, we also cover Burton upon Trent (13 miles north), Cannock (14 miles west), Lichfield (7 miles north-west), Rugeley (13 miles north-west), Burntwood (10 miles west) and Hednesford (14 miles north-west).
Around Bitterscote
In Bitterscote, that means homes near Landau Forte Academy QEMS, St Andrew and Landau Forte Academy Tamworth Sixth Form, among other places. You will also find Moorgate Primary Academy (0.7 miles north) and Market Vaults Public House (within half a mile north-east). For rail, the closest station is Tamworth station, roughly 0.9 miles north-east of the centre. Other landmarks nearby include Ankerside Shopping Centre (0.5 miles north-east) and Sir Robert Peel Community Hospital (1.1 miles south-west). Open spaces near Bitterscote include Middleton Lakes RSPB reserve.
Common questions in Bitterscote
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Bitterscote.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Stick to mild cleaners and a soft cloth
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
What bath repair costs
Repairs from £95. There’s no area surcharge for Bitterscote. What changes the price is:
- The type of damage
- The colour and finish to match
- Doing more than one item at once
- How easy the damage is to reach
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- One sharp close-up of the damage
- Where you are, by postcode
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Send us a photo of the damage and one of the whole item, and tell us you are in Bitterscote, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
