Wolverhampton · England
Bath chip & crack repair in Featherstone, Wolverhampton
Bath repair for Featherstone, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Damage beneath the taps
- Rusty patches near the plughole
About our bath repair in Featherstone
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and common reasons people contact us are a chipped rim or side and a hole punched through by something heavy.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Featherstone (WV10)
- Area hub
- Wolverhampton
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Featherstone
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
You may need us if you’ve spotted:
- Rusty patches near the plughole
- Chips under the taps
- Scuffs and scratches in the surface
- A failed DIY repair that’s discoloured or lifting
Questions to ask before you book
- How the colour is matched
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- What prep work is covered
FAQs for Featherstone
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
How do I get a price for bath repair in Featherstone?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What areas do you cover?
Everywhere in the UK, Featherstone included. Travel is included in the price.
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- A fixed quote before booking
- Dust sheets down, tidy finish
See our prices page or resurfacing vs replacement cost guide.
What bath repair costs
Prices start from £95. There’s no charge for travel to Featherstone. The price comes down to:
- How easy the damage is to reach
- How many areas need work
- How many items we do on one visit
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- The postcode, so we can plan the visit
- Details of any past repairs
- A wider photo showing the whole bath
- The material, if you know it
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Nearby places to Featherstone
Other services in Featherstone
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Featherstone
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
How to care for the repair
Most damage we see is avoidable. A few tips:
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you’re working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Covering Featherstone
Featherstone is about 4 miles north of Wolverhampton, in Wolverhampton. Wherever you are in the WV10 postcode area, a technician comes to you. Featherstone is one of 96 towns and villages in Wolverhampton where we work. Our jobs stretch from Featherstone to Birmingham (about 15 miles away).
Jobs in WV10 work the same way as everywhere else we cover. That includes homes on Snipe Close, Turnstone Drive and Teasel Grove. We also travel to Shareshill (1 mile north-east), Westcroft (1 mile south), Latherford (1 mile north), Underhill (2 miles south) and Essington (2 miles south-east). We also work in nearby towns such as Wolverhampton (4 miles south), Bilston (6 miles south), Coseley (7 miles south), Wednesfield (3 miles south), New Invention (3 miles south-east) and Gornal (9 miles south).
What’s near Featherstone
In Featherstone, that means homes near Church of St Mary and St Luke, West Midlands Construction UTC and Featherstone Academy. For rail, the closest station is Landywood station, roughly 3.2 miles east. Other landmarks nearby include Bentley Bridge Retail Park (3.3 miles south) and Cheslyn Hay North and Saredon (2.4 miles north-east). Open spaces near Featherstone include Pouk Hill.
About our accreditations · Every repair comes with a one-year guarantee.
