Surrey · England
Bath Repair in Flexford
Chip and crack repairs to enamel, acrylic and cast iron baths in Flexford, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- Impact holes in acrylic
Landlord and trade work in Flexford
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
If you manage property in Flexford, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
About our bath repair in Flexford
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Common call-outs are for damage beneath the taps and rusty patches near the plughole, on roll-top & freestanding, cast iron enamel and acrylic.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Area
- Flexford (GU3)
- Area hub
- Surrey
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Flexford
What do you need from me?
Use the quote form or ring 0345 017 0787.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Something went through my bath. Can it be fixed?
Generally. Send us a picture of the hole and one from under the bath if you can.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Common problems we fix in Flexford
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The most common problems we’re called about are:
- Hairline or through cracks in acrylic
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
Before booking anyone
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- If travel is included in the price
Flexford and nearby
Flexford is about 4 miles east of Aldershot, in Surrey. Jobs in Flexford are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Flexford is one of 395 places in Surrey where we work. You can also see our page for London, about 31 miles away.
All of GU3 is covered, from the main roads to the quietest streets. We regularly work on streets such as Christmaspie Avenue, Orchard Close and Cull's Road. If you’re just outside Flexford, we cover Christmas Pie (1 mile south), Wanborough (1 mile south-east), Normandy (1 mile north), Willey Green (1 mile north-east) and Wyke (1 mile north-west). Within a short drive, we also cover Guildford (4 miles east), Woking (7 miles north-east), Camberley (7 miles north), Farnham (6 miles south-west), Egham (14 miles north-east) and Walton-on-Thames (15 miles north-east).
Local landmarks in Flexford
Locally, our jobs take us to homes close to Church of St Bartholomew, Ash Manor School and Wyke Primary School, among other places. Flexford has its own railway station: Wanborough station. Other landmarks nearby include Seale and Tongham (2.8 miles south-west) and Ash Museum (2 miles west). Not far away are Ash Ranges and Hog's Back.
Looking after it afterwards
Nothing complicated is needed:
- Get any new chip repaired before it rusts
- Don’t scrub with anything abrasive
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
How to get a price
Email us pictures of the damage and a wider shot of the whole item, with your GU3 postcode, and we will reply with a fixed price.
Advice
What we can’t put right
A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Towns and villages near Flexford
Other services in Flexford
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Straight answers about what a repair can do
- Most jobs done in one visit
- Everything repaired in place
- Same prices wherever you are
See our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
