Surrey · England
Bath Repair in Normandy
We travel to Normandy for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Damage done while the bathroom was being fitted
Bath repair in Normandy, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair acrylic, roll-top & freestanding and pressed steel enamel, and people most frequently call us about a chipped rim or side and a kit repair that didn’t last.
A one-year guarantee comes as standard.
- Area
- Normandy (GU3)
- Region
- Surrey
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Surrey and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Prices and what affects them
Repairs from £95. We price every job individually. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- What the surface is made of
- How hard the colour is to match
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- Whether it’s been repaired or coated before
- Any details about the material
- One sharp close-up of the damage
- One picture of the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Our work in Normandy
Normandy is about 4 miles east of Aldershot, in Surrey. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 395 towns and villages across Surrey, from the larger towns to small villages. Our nearest city page is London, about 30 miles away.
Our visits in GU3 are booked in the same way as anywhere else. We regularly work on streets such as Manor Farm Close, Guildford Road and Milton Close and the roads around them. If you’re just outside Normandy, we cover Willey Green (1 mile east), Flexford (1 mile south), Christmas Pie (1 mile south), Wyke (1 mile west) and Wanborough (2 miles south). Further out, we also cover Guildford (4 miles east), Woking (6 miles north-east), Camberley (6 miles north-west), Farnham (6 miles south-west), Egham (13 miles north-east) and Walton-on-Thames (14 miles north-east).
What’s near Normandy
Our clients here include homes close to Church of St Mark, Wyke Primary School and Duke of Normandy pub, among other places. Normandy’s nearest station is Wanborough station, about 0.7 miles south. Well-known places in the area include Ash Museum (2.1 miles west) and Guildford Hospital (2.6 miles east). For a walk, there’s Hog's Back and Ash Ranges.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
What we do, step by step
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Ask for a price
To get a price, send two or three pictures through our quote form or ring us. We will say immediately whether it can be repaired.
Advice
What we’re called out for in Normandy
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Contact us if you’ve noticed:
- Chips along the edge of the bath
- Scuffs and scratches in the surface
- A chip where the taps sit
- Rust by the waste and overflow
Comparing quotes
- What preparation is included
- Whether a trained technician does the job
- How the room is protected while they work
- What the guarantee covers, and for how long
When we’d advise against a repair
In fairness, some problems need a different fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Towns and villages near Normandy
Also in Normandy
Aftercare tips
Most damage we see is avoidable. A few tips:
- Stick to mild cleaners and a soft cloth
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Do not scrub with anything abrasive
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Normandy questions
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can a cracked acrylic bath be fixed?
Generally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What happens after I send photos?
We review the photos and send a fixed quote and the next dates we have.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
How long does the repair take to cure?
Usually the day after. We confirm the time before we leave.
About our accreditations · Every repair comes with a one-year guarantee.
