North Yorkshire · England

Bath Repair for Foggathorpe homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Foggathorpe. Send photos for a free, fixed quote.

  • Repairs from £95
  • A kit repair that didn’t last
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Foggathorpe

About our bath repair in Foggathorpe

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We are frequently asked to fix impact holes in acrylic and rust spots around the plughole, on cast iron enamel, roll-top & freestanding and acrylic.

Whatever the size of the job, you get the same one-year guarantee.

Location
Foggathorpe (YO8)
County
North Yorkshire
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Do you need bath repair in Foggathorpe?

Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

People normally call us when they notice one of these:

  • An old repair that has yellowed or come loose
  • A hole punched through by something heavy
  • Chips along the edge of the bath
  • Chips under the taps

What your quote should include

  • Whether they match the colour on site
  • What happens if the damage is worse than the pictures show
  • Aftercare advice
  • How long it needs to cure

Our hiring checklist

Foggathorpe and nearby

Foggathorpe is about 8 miles south-west of Pocklington, in North Yorkshire. Whether you are in the middle of Foggathorpe or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 626 towns and villages across North Yorkshire. Our nearest city page is Leeds, about 28 miles away.

Here we cover the YO8 postcode area. We also cover the places around Foggathorpe: Laytham (1 mile north), Willitoft (2 miles south-west), Water End (2 miles east), Spaldington (2 miles south) and Bubwith (3 miles west). Further out, we also cover Selby (9 miles west), Barlby (8 miles west), Brayton (10 miles south-west), Thorpe Willoughby (12 miles west), Hambleton (13 miles west) and Cawood (11 miles west).

What’s near Foggathorpe

The closest station to Foggathorpe is Howden station, about 4.3 miles south of the centre. Other landmarks nearby include Duffield Castle (3.9 miles west).

Map of Foggathorpe © OpenStreetMap contributors

Foggathorpe: your questions answered

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can you redo an old repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before.

Which areas do you work in?

All of North Yorkshire, and the rest of the UK. There’s no extra charge for travel.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How invisible is a bath repair?

We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Before we arrive

  • Point us to the nearest place to park
  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Related advice

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the entire surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we can’t get to from below

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Do not scrub with anything abrasive
  • Get a dripping tap fixed promptly
  • Make sure an acrylic bath is firm underfoot
  • Cover the bath during DIY or decorating

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

How we price bath repair

Prices start from £95. We don’t charge extra for travel to Foggathorpe. The price comes down to:

  • What the surface is made of
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • Whether we combine several jobs

A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.

Send pictures for a quote

You can generally get a fixed price without us visiting. To help us price it:

  • What it’s made of, if you know
  • Natural light rather than flash
  • A coin beside the damage so we can judge size
  • Details of any past repairs

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Work for landlords and builders

If you manage property in Foggathorpe, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.