Isle of Anglesey · Wales
Bath chip & crack repair in Valley, Isle of Anglesey
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Valley and across Isle of Anglesey. Send pictures for a free, fixed quote.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
Bath repair at your home in Valley
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. Our repair technicians work on whirlpool & spa baths, cast iron enamel and acrylic, and people most frequently call us about damage done while the bathroom was being fitted and a cracked acrylic bath.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Valley (LL65)
- County
- Isle of Anglesey
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow two to three hours for most chips, and we will keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Advice
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Valley use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Places near Valley
More services for Valley
What we are called out for in Valley
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Holes from dropped items
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
Comparing quotes
- Who turns up on the day
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
Our work in Valley
Valley (Welsh: Y Fali) is about 3 miles south-east of Holyhead, in Isle of Anglesey. Clients in Valley get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Valley is one of 115 places in Isle of Anglesey where we work. You can also see our page for Liverpool, about 68 miles away.
Our visits in LL65 are booked in the same way as anywhere else. Whether you live on Station Road, Stanley Avenue and Manning Drive or a nearby road, we can come to you. Other places close to Valley include Four Mile Bridge (1 mile south-west), Caergeiliog (1 mile south-east), Llanfair-yn-Neubwll (2 miles south-east), Llanfihangel yn Nhowyn (2 miles south-east) and Penrhyn (2 miles south-east). We also work in nearby towns such as Holyhead (3 miles north-west), Blackbridge (3 miles north-west), Porth-y-Felin (4 miles north-west), Llangefni (11 miles east), Stryd (3 miles north-west) and Pont-Hwfa (4 miles north-west).
What’s near Valley
Locally, our jobs take us to homes close to St Michael's Church, The Bull Hotel and Ysgol Gymuned Fali, among other places. Valley has its own railway station: Valley station. Well-known places in the area include Caer Gybi (3.2 miles north-west) and Ysbyty Penrhos Stanley (2.4 miles north-west). Not far away are Llyn Dinam and Hirfron.
How to care for the repair
It’s all simple stuff:
- Do not leave razors or cans standing in the bath
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Repair or replace in Valley?
Many people think a damaged bath means a new one. Normally it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why Valley clients choose us
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
- A year’s guarantee on all work
- Honest advice, even when it means no job
Take a look at our pricing or resurfacing vs replacement cost guide.
FAQs for Valley
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
How do I get a price for bath repair in Valley?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
About our accreditations · Every repair comes with a one-year guarantee.
